BMS (Battery Management System) – a battery management system that is designed to monitor the status of batteries, control the process of charging/discharging the battery etc.
Five batteries (18650) can be connected simultaneously to this charge-discharge controller module. The module has protection against short circuit, overcharge and over-discharge. One of the functions of the charge controller is to turn off the power supply for the batteries when the maximum capacity of at least one battery is reached. This BMS controller is designed for more than 30,000 hours of operation. The maximum allowable current is 25 A.
If the maximum permissible value of the supply voltage is exceeded, the charge controller activates the “protection” mode. In order to restore the module, it is necessary to re-apply voltage to the input of the BMS board or wait a while until the charge controller automatically disables protection.
سمات:
- حجم صغير مصمم لحزمة بطارية ذات أربع خلايا.
- دائرة بسيطة ومريحة للاتصالات السهلة
- الإفراط في الشحن/الإفراط في التفريغ الحماية.
الشحنة تحتوي:
1 × 5S 15A 18650 لوح حماية بطارية الليثيوم
نموذج | HXYP-5SBM15 REV1.0 |
شحن الجهد | 21 فولت |
التيار الشاحن | 15 أمبير (كحد أقصى) |
تيار التفريغ المستمر | 15 أمبير (كحد أقصى) |
تيار التفريغ لحظية | 25 أ |
كشف الشحن الزائد | 4.28 ± 0.05 فولت |
حماية التأخير | 0.5 ثانية |
الافراج عن الإفراط في الشحن | 4.28 ± 0.05 فولت |
الإفراط في التفريغ حماية | Over-discharge detect: 2.55±0.08V Over-discharge detect delay: 0.1s Release voltage: 2.9±0.1V |
حماية ماس كهربائى | Protect condition: Cut load Detect delay: 250uS Release condition: Cut load |
الإفراط في الحماية الحالية | Detect voltage: 150mV Detect delay: 9MS Current detect: 30±3A Release condition: Cut load Inner Resistance: ≤20mΩ |
استهلاك الذاتي | تيار العمل: ≥30uA تيار النوم: (عند الشحن الزائد) ≥10uA نطاق درجة حرارة العمل: -30-+80 |
الطول (مم) | 90.46 |
العرض (مم) | 17.30 |
الارتفاع (مم) | 3.6 |
الوزن (جم) | 5 |
وزن الشحنة | 0.02 كجم |
أبعاد الشحنة | 10 × 3 × 2 سم |