This protection board is 5s in common use lithium battery protection board (you can adjust for how many strings to be used) Specified chip, stable performance, support disconnection protection, over-current protection, over-discharge protection, overcharge protection, with balance, etc. A common use for “same port” and “different port”, the protection board uses 15 high-power of ultra-low resistance MOS tubes (discharge of 8, charging 7), in the same port mode can support the discharge current 60A, charging current 60A; different port mode discharges current 80A, charging current 60A. Can used for LMO.Ternary lithium battery.LCO (3.7V)battery packs etc.
سمات:
- Over charge protective current:100A
- Over discharge protective current:100A
- Over-discharge protect delay : 0.5-1.5S
- Temperature protection: Yes, have a Temperature control interface.
- قطع الحماية: نعم
- Shortage protect: Yes
- تأخير النقص: 100-600 الولايات المتحدة
- Shortage protects recover mode: Offload release.
- balance function: yes
الشحنة تحتوي:
1 x White 5S 100A LiFePO4 Lithium Battery Protection PCB Board
| For Li-Po LiMnO Protect Parameter | 3.6V/3.7V |
| Single-cell battery overcharge protect voltage | 4.21-4.29 فولت |
| Single-cell battery overcharge protects recover voltage: | 4.14-4.24 V |
| فاحش حماية التأخير | 1.5-2.5 ثانية |
| Single cell battery over-discharge protect voltage | 2.72-2.88 فولت |
| Single cell battery over-discharge protect recover voltage | 2.9-3.1 V |
| Over charge protective current | 100 أ |
| Over discharge protective current | 100 أ |
| الإفراط في التفريغ حماية التأخير | 0.5-1.5 ثانية |
| Temperature protection | Yes, have a Temperature control interface. |
| افصل الحماية | نعم |
| تأخير النقص | 100-600 الولايات المتحدة |
| Contact discharge current | 80A |
| Syncline discharge current | 60 أ |
| التيار الشاحن | 60 أ |
| توازن الأمبير (الحالي) | 60MA |
| وزن الشحنة | 0.015 كجم |
| أبعاد الشحنة | 8 × 7 × 1 سم |
