The LCD 12864B display is based on the ST7920 controller which is quite a popular controller used for Arduino. It is easy to use and compatible with the majority of microcontrollers out there. You can do a lot of graphics stuff with this display. You can create frames and even make small animations.
The 12864B Graphic LCD module is a 128 x 64 pixel LCD display with a blue backlight and white foreground. The display is fully programmable and can display a combination of both graphics and text.
This 12864B LCD is a big, bold, beautiful blue شاشات الكريستال السائل with white back-lit pixels. It is also well known for its wide use in 3D Printers, an extension accessory of RAMPS. If you want to add some visual output to your Arduino projects, you’ll need a display. This LCD display is best suited to the graphical upgrade to those popular 16×2 LCDs but allows full graphical control.
In addition to writing text, this graphic 12864B LCD series allows the user to draw lines, circles, and boxes, set or redefine individual pixels, clear specific blocks of the عرض, backlight control, and adjustment of the baud rate. The LCD 12864b (128×64) Graphic Blue Color Backlight LCD Display module has its pins which are documented on the back of the شاشات الكريستال السائل to assist in wiring it up. It is very easy to interface this LCD with the RAMPS controller of the 3D printer.
الشحنة تحتوي :
1 x 12864B Graphic Blue Color Backlight LCD Display Module
ورقة البيانات تحميل
| نموذج | LCD12864 |
|---|---|
| سائق آي سي | ST7920 |
| لون الحرف | أبيض |
| الإضاءة الخلفية | أزرق |
| جهد الإدخال (فولت) | 5 |
| Number of Data lines | 8-bit Parallel |
| الطول (مم): | 94 |
| العرض (مم): | 70 |
| الارتفاع (مم): | 12 |
| الوزن (جرام): | 65 |
| وزن المشتريات | 0.07 كجم |
| الشحن الأبعاد | 10 × 8 × 2 سم |
