لوحة شرائح اردوينو نانو CH340 بدون كابل USB (ملحوم) جودة عالية

270.00 جنية

لوحة شرائح Arduino Nano CH340 بدون كابل USB (ملحوم)

  1. جهد التشغيل (المستوى المنطقي): 5 فولت
  2. With Soldered Connector
  3. 8 منافذ مدخلات تناظرية: A0 ~ A7
  4. 14 منفذ إدخال/إخراج رقمي: TX، RX، D2 ~ D13
  5. زوج واحد من منافذ الإرسال والاستقبال التسلسلية على مستوى TTL RX / TX
  6. باستخدام اتميل Atmega328P-AU MCU
  7. يوجد محمل إقلاع مثبت فيه
  8. تباعد قياسي 0.1 بوصة DIP (صديق للوحة التجارب).
  9. مفتاح إعادة الضبط اليدوي.
رمز المنتج: AR_Nano CH340 Soldered التصنيف: الوسوم: , , , , , ,
يشارك:

لوحة شرائح Arduino Nano CH340 بدون كابل USB (ملحوم)

The CH340 Soldered Nano Board R3 Chip  is based on the famous Arduino platform and does all the functions of Uno, but with a smaller footprint.

Nano CH340 Soldered Board R3 Chip is vital for your small project where you don’t need much of a pin-outs but the small size is very important to make it look good.

The Nano equips a low-cost USB-Serial Chip that makes it less in price than Nano with FTDI USB-Serial Chip used on older versions of Arduino Nano.

The Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano R3). It has more or less the same functionality of the Arduino Uno but in a different package. It lacks only a DC power jack and works with a Mini-B USB cable instead of a standard one.

The Nano can be power via the mini-USB connection, 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.

The size of Nano V3.0 with CH340 Chip is only 43 mm x 18 mm; it comes with 6 PWM I/O from the total of 14 digitals I/O, 8 analog inputs, 16Mhz clock speed and 32kB of flash memory.

Note:- CH340 chip might not work directly with some PC/Laptop, you will need some ch340 drivers.
If you are getting the error while uploading the code in the Arduino Nano or not detecting the port need to upload the محمل الإقلاع.

Features of الاردوينو Nano:

  1. زوج واحد من منافذ الإرسال والاستقبال التسلسلية على مستوى TTL RX / TX
  2. باستخدام اتميل Atmega328P-AU MCU
  3. يوجد محمل إقلاع مثبت فيه
  4. Support USB download and Power
  5. Support for external 5V ~ 12V DC power supply
  6. Support power supply by 9V battery
  7. Support ISP download
  8. Automatic reset during program download.
  9. Power OK blue LED on the bottom.
  10. Green (TX), red (RX) and orange (L) LED.
  11. 5V to AREF jumper.
  12. Auto sensing/switching power input.
  13. Small mini-B USB for programming and serial monitor (cable not included).
  14. ICSP header for direct program download.
  15. تباعد قياسي 0.1 بوصة DIP (صديق للوحة التجارب).
  16. مفتاح إعادة الضبط اليدوي.

الشحنة تحتوي :

1 x Nano CH340 Chip Board Without USB cable compatible with Arduino (Soldered)

دبابيس الإدخال/الإخراج التناظرية 8
بنيان أفر
سرعة الساعة 16 ميجا هرتز
لون أزرق
تيار مستمر لكل طرف إدخال/إخراج (مللي أمبير) 40
دبابيس الإدخال/الإخراج الرقمية 22
إيبروم 1KB
ذاكرة متنقله 32 كيلو بايت
جهد الإدخال (مستحسن) 7-12 خامسا
متحكم ATmega328
جهد التشغيل (VDC) 5
استهلاك الطاقة (واط) 1
دبابيس إخراج PWM 6
سرام 2
الوزن (جم) 8
وزن الشحنة 0.012 كجم
أبعاد الشحنة 6 × 5 × 3 سم
عربة التسوق
تسجيل الدخول


لا يوجد حساب بعد؟

إنشاء حساب
اقدر اخدمك ازي يا فندم ؟
مسح الرمز