اردوينو نانو RP2040 تواصل مع الرأس

1,400.00 جنية

  1. 133MHz 32bit Dual Core Arm Cortex-M0 Processor
  2. 264kB on-chip SRAM
  3. U-Blox Nina W102 WiFi/Bluetooth Module
  4. 240MHz 32bit Dual Core Xtensa LX6
  5. 520kB on-chip SRAM
رمز المنتج: AR_nano RP2040 التصنيفات: , الوسوم: ,
يشارك:

While the news-breaking launch of the راسبيري بي بيكو is still fresh in our minds, here is another launch of a tiny but powerful development board in the world of microcontroller boards on the footprint of Raspberry Pi  Pico from Arduino officials.

Arduino Nano RP2040 Connect with Header

Arduino named it “Arduino Nano RP2040 Connect” a newly launched Microcontroller board welcoming the Raspberry Pi’s RP2040chip on which NANO connect has been built. The Arduino Nano RP2040 Connect shares a similar form factor to the Raspberry Pi Pico, but it includes extra functionality, chiefly WiFi and Bluetooth along with a 9-axis IMU sensor and microphone.

Arduino also broke the news that they will be porting the Arduino IDE for use with the RP2040 chip. This is welcome news for C/C developers and embedded hobbyists alike.


الميزات والمواصفات:

Raspberry Pi RP2040 Microcontroller:
  1. 133MHz 32bit Dual Core Arm Cortex-M0
  2. 264kB on-chip SRAM
  3. Direct Memory Access (DMA) controller
  4. Support for up to 16MB of off-chip Flash memory via dedicated QSPI bus
  5. USB 1.1 controller and PHY, with host and device support
  6. 8 PIO state machines
  7. Programmable IO (PIO) for extended peripheral support
  8. 4 channel ADC with internal temperature sensor, 0.5 MSa/s, 12-bit conversion
  9. SWD Debugging
  10. 2 on-chip PLLs to generate USB and core clock
  11. 40nm process node
  12. Multiple low power mode support
  13. USB 1.1 Host/Device
  14. Internal Voltage Regulator to supply the core voltage
  15. Advanced High-performance Bus (AHB)/Advanced Peripheral Bus (APB)
U-blox® Nina W102 WiFi/Bluetooth Module:
  1. 240MHz 32bit Dual Core Xtensa LX6
  2. 520kB on-chip SRAM
  3. 448 Kbyte ROM for booting and core functions
  4. 16 Mbit FLASH for code storage including hardware encryption to protect programs
    and data
  5. 1 kbit EFUSE (non-erasable memory) for MAC addresses, module configuration,
  6. Flash-Encryption, and Chip-ID
  7. IEEE 802.11b/g/n single-band 2.4 GHz WiFi operation
  8. Bluetooth 4.2
  9. Integrated Planar Inverted-F Antenna (PIFA)
  10. 4x 12-bit ADC
  11. 3x I2C, SDIO, CAN, QSPI
Memory:
  1. AT25SF128A 16MB NOR Flash
  2. QSPI data transfer rate up to 532Mbps
  3. 100K program/erase cycles

الشحنة تحتوي:

1 x Arduino Nano RP2040 Connect with Header

مقاس
يكتب
عربة التسوق
تسجيل الدخول


لا يوجد حساب بعد؟

إنشاء حساب
اقدر اخدمك ازي يا فندم ؟
مسح الرمز