مستشعر كشف قيمة PH السائل Ph0-14 مع لوحة تحكم مراقبة BNC لقطب PH
This is a Liquid pH Value Detection Sensor for Arduino. This is used in water quality testing and Aquaculture
The pH stands for the power of hydrogen, which is a measurement of the hydrogen ion concentration in the body. The total pH scale ranges from 1 to 14, with 7 considered to be neutral. A pH less than 7 is said to be acidic and solutions with a pH greater than 7 are basic or alkaline.
The PH electrode has a single cylinder that allows direct connection to the input terminal of a pH meter, controller, or any pH device which has a BNC input terminal. The pH electrode probe is accurate and reliable that can give almost instantaneous readings.
Connection Diagram of Liquid pH Value Detection Sensor for Arduino:
This is Electrode Probe for Liquid pH Value Detection Sensor Module. Need to measure water quality and other parameters but haven’t got any low-cost pH meter? Find it difficult to use with Arduino?
The electrode is made of a pH glass electrode and a reference electrode combined composite electrode, which is pH meter measuring sensor for measuring the concentration of an aqueous solution of H (pH value), it is widely used in various fields to be detected in the pH.
The PH electrode has a single cylinder that allows direct connection to the input terminal of a PH meter, controller, or any PH device which has a BNC input terminal. The PH electrode probe is accurate and reliable that can give almost instantaneous readings.
سمات :
- BNC Connector is suitable for most PH meter and controller.
- Suitable for a wide range of application: Aquariums, Hydroponics, Laboratory, etc.
Specification of Electrode Probe :
pH Range | 0-14 pH |
درجة حرارة التشغيل (درجة مئوية) | 0 to 60 |
Zero Point | 7±0.5 pH |
Alkali Error | 0.2 pH |
Theoretical Percentage Slope | ≧98.5% |
Internal Resistance | ≦250MΩ |
Response Time | ≦1min |
Terminal Blocks | BNC plug |
Total Probe Length (m) | Approx 1m |
الوزن (جم) | 56 |
وزن الشحنة | 0.07 كجم |
أبعاد الشحنة | 24 × 4 × 4 cm |
Specification of Liquid pH Value Detection Sensor:
Heating Voltage (V) | 5±0.2 |
Working Current (mA) | 5 to 10 |
Detection Concentration Range | PH0-14 |
Detection Range of Temperature (°C) | 0 to 60 |
Response Time (s) | ≤5 |
Stability Time (s) | ≤60 |
Power Consumption (W) | ≤0.5 |
درجة حرارة التشغيل (درجة مئوية) | -10 إلى 50 |
Working Humidity (%RH) | 95 |
حجم ثنائي الفينيل متعدد الكلور (الطول × العرض) ملم | 42 x 32 |
الارتفاع (مم) | 16 |
الوزن (جم) | 20 |
وزن الشحنة | 0.022 كجم |
أبعاد الشحنة | 8 × 4 × 2.5 cm |
الشحنة تحتوي :
1 x Electrode Probe for Liquid pH Value Detection Sensor Module.
1 x Liquid pH Value Detection Sensor For Arduino
1 x set of Mounting Accessories