بطاقة الهوية المحمولة بموجات الراديو وقارئ ناسخة بموجات الراديو 125 كيلو هرتز مع 3 علامات تعريف فارغة
تحديد
المواد: عبس
Supported blank tag: T5577,5200.
Working frequency: 125Khz
Power: 2x AAA battery(Batteries are not included)
Working status Led:Read , Write
Button: Read Button,Write Button
Handheld RFID Writer Size:11.5 x 6.8cm/4.53 x 2.68inch
Features of RFID handheld ID card RFID copier reader writer 125KHz with 3 blank ID tags
This device is used to clone 125Khz FRID card.
It can copy and duplicate the 125 Khz EM4100 / EM410X card /tag ID for backup purpose.
This handle RFID writer is very easy to use.
You can copy the ID card, such as access cards, cell cards, parking cards.
How to clone
1.Push power switch on the right of device, it will keep two or three times, and LED is on mean it works, if not restart please.
2.Put the other card near the antenna left of the device, and then press READ button,the device will keep and the LED is on when read successful, if beep 2 times go to step 3, if beep 3 times go to step 4, click READ again if it doesn’t beep.
3.change an new blank card as T5577/5200, then press WRITE button, when beep PASS LED is on mean clone successful, if it doesn’t beep and light please write again.
4.Change a blank T5557, then press WRITE button, when beep PASS LED is on mean clone successful, if it doesn’t beep and light please write again.
5.Repeat step 3 or step 4 if you want to make more same ID card.
6.Switch off for save power.
RFID handheld ID card copier reader writer 125KHz with 3 blank ID tags
المراجعات
لا توجد مراجعات بعد.