تدفق سائل اللحام 30 مل للفولاذ المقاوم للصدأ والمعادن الخاصة

50.00 جنية

لحام السائل الجريان برو لسبائك النحاس 30 مل

رمز المنتج: SFlux Liquid 30mL (Stainless Steel & Special Metals) التصنيف: الوسوم: ,
يشارك:
Liquid Flux 30mL for Special Metals

Flux, Tin soldering liquid flux 30mL for special metals, electrical & industrial appliances, and automotive by using only tin soldering iron.

سمات:

• Joker flux, multi-purpose.
• Compatible with all tin alloys.
• High quality, activity, and fast soldering.
• The post-solder residues can be easily cleaned with distilled water.
• Mildly acidity.

الاستخدام:

• Tin soldering flux for special metals such as nickel, nickel-chrome alloys, monel alloy (nickel-copper), pewter, silver, zinc, galvanized metals, stainless steel plates/wires, mild steel, and iron.
• Soldering lithium-ion battery 3.7v, coin battery (button cell or watch battery), and neodymium magnets.
• Automotive restoration, repairing old radiators and rusted iron.
• Quick fix for the soldering tip.

Usage Recommendations (very important):

• Follow safety precautions & notes.
• Clean the surface with water, thinner, or any solvent without any residues or dust.
• Put a very little bit of flux before soldering.
• Use a suitable soldering iron tip with the target area.
• Use a suitable wattage soldering iron with the target size.
• Use a wet soldering sponge for cleaning the tip and during soldering.
• Use distilled water, thinner, or any alcohol for cleaning.

ملحوظات:

• For best results, follow the usage recommendations.
• Batteries may be damaged if it is exposed to high heat!
• It’s recommended to use a copper soldering tip when soldering neodymium magnets.
• It’s recommended to use a high-wattage soldering iron (Min. 200 Watt) when soldering a radiator.
• Not suitable for soldering to aluminum.
• Not suitable for soldering to PCB/SMD.
• Not suitable for soldering to SMT/BGA chipset.
• Not suitable with dip or wave soldering.
• Not suitable with welding by fusion or flame.

Safety Precautions:

• Wearing safety glasses and gloves is recommended when using.
• Perform the process in a well-ventilated area.
• Don’t breathe soldering fumes.
• Close after using & keep away from children.
• Use enough water when eyes or wounds are touched.

Appearance: The flux is a viscous liquid, packaged in a plastic dropper bottle with a net capacity of 30mL.

ضمان 14 يومًا

يتمتع هذا المنتج بضمان قياسي لمدة 14 يومًا من وقت التسليم ضد عيوب التصنيع فقط. يتم تقديم هذا الضمان لصالح عملاء Micro Ohm ضد أي نوع من عيوب التصنيع. سيتم الاستبدال ضد عيوب التصنيع.

ما يلغي الضمان:

إذا كان المنتج عرضة لسوء الاستخدام أو العبث أو التفريغ الساكن أو الحوادث أو الماء أو الحريق أو استخدام المواد الكيميائية أو اللحام أو التغيير بأي شكل من الأشكال.

عربة التسوق
تسجيل الدخول


لا يوجد حساب بعد؟

إنشاء حساب
اقدر اخدمك ازي يا فندم ؟
مسح الرمز