150W DC-AC Converter Booster Module 12V To 110V 200V 220V 280V 150W Inverter
Features of 150W Inverter :
Solder-free, the input terminal adopts 7.62 terminal block
The high-frequency AC output adopts blue 301 terminal block, and the DC output is 7.62 terminal
The voltage can be selected arbitrarily, through the jumper cap, without soldering
The output power is large, if there is a fan to dissipate heat, this board can output 200W power using double-sided circuit board
The AC output can be doubled rectified or a purely resistive load
Specifications:
High-frequency AC output port: only suitable for resistive loads, such as ordinary household incandescent bulbs (tungsten wire bulbs), ordinary electric soldering irons, or doubled pressure rectifier circuit, measuring the output voltage do not measure this output port, because these voltmeters are designed to measure 50Hz household voltage, not high-frequency voltage, there will be huge measurement errors.
DC output port: you can use a multimeter DC file to measure the voltage, can be with switching power supply load (the input voltage is marked as AC100-240V electrical appliances can be used), resistive load. 150W inverter battery DC12V step-up AC220V step-up transformer power conversion circuit board.
Switch: The red line and black line on the board are switches to control the presence or absence of high voltage output.
Input voltage: 12V, limited low input voltage 8V, limited high input voltage 14.8V. Since there is no input fuse on this board, please add your own fuse, it is recommended to add 15A fuse (lithium battery power supply and switching power supply, DC power supply, such power supply will cause the tube to overheat and burn out), the output is unstable, the input should ensure sufficient power (current), otherwise it is easy to burn out the tube.
Output voltage: 110V 200V 220V 280V
Output waveform: high frequency square wave or DC (unfiltered)
Output power: 150W (above 100W, please add fan for cooling)
No-load 12V terminal current: 250 mA
Operating frequency: 27KHZ
Protection: No protection, please add your own fuse when using
Features: solder-free, input terminal adopts 7.62 terminal block, high-frequency AC output adopts blue 301 terminal block, DC output 7.62 terminal block (directly loosen the screw at the top of the terminal terminal, insert the wire, and tighten the screw)
The voltage can be selected arbitrarily, through the jumper cap, without soldering
The output power is large, if there is a fan to dissipate heat, this board can output 200W power using double-sided circuit board.
AC output: can be doubled rectified, or pure resistive load
Output voltage: Already marked on the circuit board
Attention:
Available electrical range: switching power supply load, generally marked with input voltage 100-240V electrical appliances can generally be used, such as non-cottage mobile phone chargers, set-top boxes, DVD, LED lights (there is constant current drive, so some can be used, some LED lamps can not be used, when used, can only be connected to the DC output port, must not be connected to the high-frequency AC output port) ordinary tungsten light bulbs, small hand drills, energy-saving lamps, ordinary non-temperature regulating electric soldering iron, the circuit that requires high-voltage voltage rectification, LCD TV set connected to DC output port and so on.
Unusable electrical range: iron core transformers, such as audio using iron core transformers, temperature control electric soldering irons, dimming lamps, AC motor loads such as electric fans. Cheap capacitance step-down LED lamps (e.g. LED night lights, straw hat LED lamps, LED lamps with plastic housings)
Package Included:
Inverter X1
