RM065 Trimpot Trimmer Potentiometer Pot
RM065 5k Ohm Trimpot Trimmer Potentiometer 502 Pot السعر الأصلي هو: 3.00 EGP.السعر الحالي هو: 2.50 EGP.
7400 Quad 2 Input NAND Gate IC (7400 IC) DIP-14 Package
7430 8-Input NAND Gate السعر الأصلي هو: 19.00 EGP.السعر الحالي هو: 10.00 EGP.

4094 IC "8-Stage Shift & Store Bus Register"

35.00 EGP

The 4094; 4094 is an 8-bit serial-in/serial or parallel-out shift register with a storage register and 3-state outputs.

🚚 نوفر شحنًا لجميع المحافظات داخل مصر

⚠ الكمية المطلوبة يتم تأكيد توفرها بعد مراجعة وتجهيز الطلب

Share:

The 4094; 4094 is an 8-bit serial-in/serial or parallel-out shift register with a storage register and 3-state outputs. Both the shift and storage register have separate clocks. The device features a serial input (D) and two serial outputs (QS1 and QS2) to enable cascading. Data is shifted on the LOW-to-HIGH transitions of the CP input. Data is available at QS1 on the LOW-to-HIGH transitions of the CP input to allow cascading when clock edges are fast. The same data is available at QS2 on the next HIGH-to-LOW transition of the CP input to allow cascading when clock edges are slow. The data in the shift register is transferred to the storage register when the STR input is HIGH. Data in the storage register appears at the outputs whenever the output enable input (OE) is HIGH. A LOW on OE causes the outputs to assume a high-impedance OFF-state. Operation of the OE input does not affect the state of the registers. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.
Features
? Complies with JEDEC standard JESD7A
? Input levels:
? For 74HC4094: CMOS level
? For 74HCT4094: TTL level
? Low-power dissipation
? ESD protection:
? ? HBM JESD22-A114F exceeds 2 000 V
? MM JESD22-A115-A exceeds 200 V
? Specified from -40 ?C to 85 ?C and from -40 ?C to 125 ?C
Applications
? Serial-to-parallel data conversion
? Remote control holding register
Download Datasheet

14 Days Warranty

This item is covered with a standard warranty of 14 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Micro Ohm customers from any kind of manufacturing defects. Replacement will be done against manufacturing defects.

What voids warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

You may also like…

You Love that

18650 Battery Insulation Paper Hollow Pack 3S Hole 1pcs

M&R Digital HotAir Soldering Station & Soldering Iron MR 852D

W3230 AC110-220V Digital Temperature Controller Microcomputer Thermostat Switch

Shopping cart
Sign in


No account yet?

Create an Account