Welcome to Micro Ohm Electronics!
phone-call
010 3033 2568
location
Our Location

Liquid PH Value Detection Sensor Ph0-14 With PH Electrode Probe BNC Monitoring Control Board

1,000.00 EGP

  1. PH range: 0-14 PH
  2. Temperature range: 0-60℃
  3. Zero-point: 7 ± 0.5PH
  4. Alkali Error: 0.2PH
  5. Theoretical Percentage Slope: ≧98.5%
  6. Internal Resistance: ≦250MΩ
  7. Response Time: ≦1min

Out of stock

SKU: PH Value Detection Sensor Category: Tags: ,

Liquid PH Value Detection Sensor Ph0-14 With PH Electrode Probe BNC Monitoring Control Board

This is a Liquid pH Value Detection Sensor for Arduino. This is used in water quality testing and Aquaculture

The pH stands for the power of hydrogen, which is a measurement of the hydrogen ion concentration in the body. The total pH scale ranges from 1 to 14, with 7 considered to be neutral. A pH less than 7 is said to be acidic and solutions with a pH greater than 7 are basic or alkaline.

The PH electrode has a single cylinder that allows direct connection to the input terminal of a pH meter, controller, or any pH device which has a BNC input terminal. The pH electrode probe is accurate and reliable that can give almost instantaneous readings.


Connection Diagram of Liquid pH Value Detection Sensor for Arduino:


This is Electrode Probe for Liquid pH Value Detection Sensor Module. Need to measure water quality and other parameters but haven’t got any low-cost pH meter? Find it difficult to use with Arduino?

The electrode is made of a pH glass electrode and a reference electrode combined composite electrode, which is pH meter measuring sensor for measuring the concentration of an aqueous solution of H (pH value), it is widely used in various fields to be detected in the pH.

The PH electrode has a single cylinder that allows direct connection to the input terminal of a PH meter, controller, or any PH device which has a BNC input terminal. The PH electrode probe is accurate and reliable that can give almost instantaneous readings.


Features :

  1. BNC Connector is suitable for most PH meter and controller.
  2. Suitable for a wide range of application: Aquariums, Hydroponics, Laboratory, etc.

Specification of Electrode Probe :

pH Range 0-14 pH
Operating Temperature (°C) 0 to 80
Zero Point 7±0.5 pH
Alkali Error 0.2 pH
Theoretical Percentage Slope ≧98.5%
Internal Resistance ≦250MΩ
Response Time ≦1min
Terminal Blocks BNC plug
Total Probe Length (m) Approx 1m
Weight (gm) 56
Shipment Weight 0.07 kg
Shipment Dimensions 24 × 4 × 4 cm

Specification of Liquid pH Value Detection Sensor:

Heating Voltage (V) 5±0.2
Working Current (mA) 5 to 10
Detection Concentration Range PH0-14
Detection Range of Temperature (°C) 0 to 60
Response Time (s) ≤5
Stability Time (s) ≤60
Power Consumption (W) ≤0.5
Operating Temperature (°C) -10 to 50
Working Humidity (%RH) 95
PCB Size ( L x W ) mm 42 x 32
Height (mm) 16
Weight (gm) 20
Shipment Weight 0.022 kg
Shipment Dimensions 8 × 4 × 2.5 cm

Package Includes :

1 x Electrode Probe for Liquid pH Value Detection Sensor Module.

1 x Liquid pH Value Detection Sensor For Arduino

1 x set of Mounting Accessories

 

Shopping cart
Sign in


No account yet?

Create an Account