Welcome to Micro Ohm Electronics!
phone-call
010 3033 2568
location
Our Location

Arduino Pro Micro 5V 16M Mini Leonardo Microcontroller Development Board

260.00 EGP

  1. ATMEGA32U4 running in 5V / 16MHz
  2. Support Arduino IDE V1.0.1
  3. Micro USB interface programming on the board
  4. Four 10-bit ADC pin
  5. 12 digital I / O (5 PWM capability)
  6. Rx and Tx hardware serial connection

Arduino Pro Micro 5V 16M Mini Leonardo Microcontroller Development Board

This Pro Micro 5V 16M Mini Leonardo Microcontroller Development Board For Arduino development board has 4 channel 10 bit ADC, 5 PWM pins, 12 DIO, and a hardware serial connection Rx and Tx you are familiar with Running on 16MHz and 5V, this board will remind you a lot of other Arduino compatible boards that you like.

There is a voltage regulator on board, so it can accept up to 12V DC.

The Micro is a microcontroller board based on the ATmega32U4. It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, an ICSP header, and a reset button.

It contains everything needed to support the microcontroller; simply connect it to a computer with a micro USB cable to get started. It has a form factor that enables it to be easily placed on a breadboard.

The Micro board is similar to the Arduino Leonardo in that the ATmega32U4 has built-in USB communication, eliminating the need for a secondary processor. This allows the Micro to appear to a connected computer as a mouse and keyboard, in addition to a virtual (CDC) serial / COM port.

If you supply an unstable power supply board, be sure to connect to the “RAW”, not on the VCC pin. It has also added a PTC fuse and diode protection to the power circuit and to correct the RX and LED TX circuits.


Features :

  1. ATMEGA32U4 running in 5V / 16MHz
  2. Support Arduino IDE V1.0.1
  3. Micro USB interface programming on the board
  4. Four 10-bit ADC pin
  5. 12 digital I / O (5 PWM capability)
  6. Rx and Tx hardware serial connection.

Pin Diagram:

5V/16Mhz Pro Micro ATmega 32U4 Board Bootloader for Arduino Leonardo


Package Includes :

1 x Pro Micro 5V 16M Mini Leonardo Microcontroller Development Board For Arduino

Microcontroller ATmega32U4
Input Voltage(Recommended) 7-12V
Operating Voltage (VDC) 5
Input Voltage (limits) 6-20V
Analog I/O Pins 12
Digital I/O Pins 20
DC Current per I/O Pin (mA) 20
DC Current for 3.3V Pin (mA) 50
PWM Pins 7
Flash Memory 32 KB
EEPROM 2.5KB
SRAM 1
Clock Speed 16 MHz
Dimensions (mm) LxWxH 48x18x8
Weight (gm) 13
Shipment Weight 0.06 kg
Shipment Dimensions 8 × 6 × 4 cm
Shopping cart
Sign in


No account yet?

Create an Account