Welcome to Micro Ohm Electronics!
phone-call
010 3033 2568
location
Our Location

PL2303 PL2303HX USB To TTL(Serial) Converter Module 5 Pin

45.00 EGP

  1. Adopt imported controller PL2303HX, which can stabilize the flash with high speed
  2. 500mA self-recovery fuse for protection
  3. Two data transmission indicator can monitor data transfer status in real time
  4. Reserve 3.3V and 5V pin interface, easy for the DDWRT of different voltage system that needs power
  5. The entire board is coated by the high quality transparent heat-shrinkable sleeve, making the PCB in insulation state from outside,
  6. so that the board won’t be burnt down by material shortcut.
  7. Electrostatic package ensures the board will not be damaged before use
SKU: Usb_TTl PL2303 Categories: ,

PL2303 PL2303HX USB To TTL(Serial) Converter Module 5 Pin

This is PL2303 PL2303HX USB To TTL(Serial) Converter Module – 5 Pin. Adopt imported controller RS232 TTL, which can stabilize the flash with high-speed 500mA self-recovery fuse for protection.

Two data transmission indicator can monitor data transfer status in real-time. Reserve 3.3V and 5V pin interface, easy for DDWRT of different voltage system that needs power. The entire board is coated by a high quality transparent heat-shrinkable sleeve, making the PCB in insulation state from outside, so that the board won’t be burnt down by a material shortcut.

For issues related to Prolific USB Windows 8.1 and Windows 10 driver, see the VIDEOS section.

Applications :

  1. All kinds of satellite set-top box upgrade.
  2. Router, HDD, ADSL, broadband modem firmware upgrade or cracked upgrade.
  3. cellphone, XBOX360, GPS serial communication, vehicle inspection and test, DVD flash and so on.
  4. Burn writes STC MCU, NXP MCU, Renesas MCU, NEC MCU and so on.
  5. Simple UART communication commonly used UART debugging tools in the supper terminal.
  6. USB signal transferred to the TTL signal may be used by electronic enthusiasts.

Features : 

  1. Adopt imported controller PL2303HX, which can stabilize the flash with high speed
  2. 500mA self-recovery fuse for protection.
  3. Two data transmission indicator can monitor data transfer status in real time.
  4. Reserve 3.3V and 5V pin interface, easy for the DDWRT of different voltage system that needs power.
  5. The entire board is coated by the high quality transparent heat-shrinkable sleeve, making the PCB in insulation state from outside.
  6. so that the board won’t be burnt down by material shortcut.
  7. The electrostatic package ensures the board will not be damaged before use.
  8. Support WIN7 system.

Package Includes :

1 x PL2303 PL2303HX USB To TTL Module.

Input Supply voltage (V) 3.3 ~ 5
Model PL2303HX
Support Windows 98 to Windows 7 (32 bit and 64 bit)
Mac OS 8 to OS X (32 bit and 64 bit)
Linux
Length (mm) 52
Width (mm) 15.5
Height (mm) 6.5
Weight (gm) 5
Shipment Weight 0.01 kg
Shipment Dimensions 6 × 3 × 2 cm
Shopping cart
Sign in

No account yet?

Create an Account