ZK-MG 5-30V 12V24V 5A High Power PWM DC Motor Speed Controller Digital Display Encoder Duty
ZK-MG 5-30V 12V24V 5A High Power PWM DC Motor Speed Controller Digital Display Encoder Duty السعر الأصلي هو: 600.00 EGP.السعر الحالي هو: 450.00 EGP.
Type-C USB 2S-3S BMS 15W 8.4V 12.6V 1.5A Lithium Battery Charging Boost Module With Balanced Support Fast Charge IP2326
Type-C USB 2S-3S BMS 15W 8.4V 12.6V 1.5A Lithium Battery Charging Boost Module With Balanced Support Fast Charge IP2326 السعر الأصلي هو: 150.00 EGP.السعر الحالي هو: 120.00 EGP.

USB Type C 3A IP2312 Polymer Ternary Lithium Battery Fast Charging Board

75.00 EGP

USB Type C 3A IP2312 Polymer Ternary Lithium Battery Fast Charging Board

Share:

 

Features / Specs

  • Control Chip: INJOINIC IP2312
  • Input Voltage Range: 4.5 – 5.5VDC (Supplying more than 5.5VDC can damage the chip)
  • Compatible Battery Type: Lithium Ion & Lithium Polymer (3.7V)
  • Charge Cut-Off Voltage: 4.2V / 4.35V (Selectable with SMD jumper)
  • Max Charge Current: 3A (Adjustable with SMD resistor)
  • Conversion Efficiency: 3A @ 93% / 2A @ 94% / 1A @ 95%
  • Indication LEDs: Red LED indicates power; Blue LED indicates charge complete
  • Protection: This board does not include a fault indication LED and does not have battery protection circuitry
  • Dimensions: ~(34.5mm x 15mm x 4.8mm)

Operation Overview

  • If the connected battery is below 3VDC, the charger will deliver 100mA of trickle charge current until the battery reaches 3VDC
  • Once the connected battery has reached 3VDC, then the charger switches to CC (Constant Current) mode, and charges at the preset current limit
  • Refer to the image for the location of the current setting resistor. Default (47kΩ) is 3A, open is 2.1A, and 135kΩ is 1A.
  • Constant current mode will continue until the battery voltage is close to 4.2VDC and charging current has dropped to 300mA. At this point the charger switches to CV (Constant Voltage) mode
  • Once in CV mode, the charge will stop charging every 4 minutes to check if the battery voltage is higher than 4.15V. If it is charging will stop, if it is not then charging will continue for another 4 minutes before stopping to check again.
  • If the charger has detected that the battery is full, it will only begin charging again if the battery voltage drops below 4.1VDC

 

 

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

14 Days Warranty

This item is covered with a standard warranty of 14 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Micro Ohm customers from any kind of manufacturing defects. Replacement will be done against manufacturing defects.

What voids warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

 

Resources

 

Shopping cart
Sign in


No account yet?

Create an Account
اقدر اخدمك ازي يا فندم ؟
Scan the code