Description

🏷️ Product Title

LED 5mm Orange 12V – Transparent, Built-In Resistor

✍️ Introduction

This 5 mm orange 12 V LED 🔶 features a transparent round lens and an internal series resistor, so it connects directly to 12 V DC—no external resistor required. It’s a drop-in indicator for panels, enclosures, model dashboards, and DIY projects where fast, reliable signaling matters.

💡 Highlights

• Direct 12 V DC ⚡ — internal resistor handles current limiting.

• Bright orange output 🔸 — clear visibility with a warm hue.

• Standard 5 mm package ⚙️ — easy fit in bezels, PCBs, and breadboards.

• Polarity-marked leads ➕ long leg = Anode (+), short leg = Cathode (–).

• Long life ⏱️ — rated for extended operation within 12 V systems.

📦 What’s Included

• 5 mm Orange LED, 12 V (transparent lens, built-in resistor) × 1

✨ Key Features

• Lens: Transparent, 5 mm round (THT)

• Nominal input: 12 V DC (no external resistor needed)

• Typical operating current: ≈10–15 mA

• Wavelength: 590–600 nm

• Viewing angle: ~20°–30°

• Package leads: Through-hole, tinned copper

📊 Specifications

🧰 Compatibility & Tips

• Connect directly to 12 V DC observing polarity.

• For automotive use, many systems reach ~14 V while charging; if brightness is excessive, you may add a small series resistor (e.g., 120–220 Ω) for comfort, though not required for 12 V nominal.

• Use separate LEDs per indicator point for uniform brightness.

🎯 Use Cases

• Panel and front-panel switch indicators.

• Hobby/DIY projects and prototypes.

• Model dashboards and control enclosures.

• 12 V signage and status lights.

🛡️ Safety & Handling

• Observe polarity to avoid damage.

• Do not exceed the recommended voltage range for extended periods.

• Handle with ESD care; keep leads clean and dry before soldering.

• Avoid continuous operation in high-heat enclosures without ventilation.

🚚 Quality, Shipping & Batch Notes

• Each unit checked for 12 V operation and brightness uniformity.

• Minor cosmetic variations in epoxy clarity are normal.

• Packed in anti-static polybags for protection.

❓ FAQ

Q1: Do I need an external resistor?
A: No. The LED has a built-in resistor for 12 V DC.

Q2: Can I run it on car power?
A: Yes. It works on 12 V systems; at charging voltages (~14 V) brightness may increase—add a small resistor if you want to reduce glare.

Q3: Is the lens diffused or clear?
A: Transparent/clear lens for a forward-focused beam.

✍️ المقدمة

هذا الدايود البرتقالي 5 مم بجهد 12 فولت 🔶 يأتي بعدسة شفافة ومع مقاومة داخلية تحدّ من التيار، لذا يمكن توصيله مباشرة بجهد 12 فولت DC دون مكونات إضافية. خيار عملي وسريع لمؤشرات اللوحات والصناديق والمشاريع التعليمية.

💡 أبرز النقاط

• توصيل مباشر 12 فولت ⚡ بفضل المقاومة المدمجة.

• إضاءة برتقالية واضحة 🔸 برؤية جيدة.

• حجم قياسي 5 مم ⚙️ يناسب الحوامل والـPCB.

• تحديد قطبية سهل ➕ الرجل الطويلة موجبة.

• عمر تشغيلي طويل ضمن حدود التشغيل.

📊 المواصفات