This protection board is 3s in common use lithium battery protection board (you can adjust for how many strings to be used) Specified chip, stable performance, support disconnection protection, over-current protection, over-discharge protection, overcharge protection, with balance, etc. A common use for “same port” and “different port”, the protection board uses 15 high-power of ultra-low resistance MOS tubes (discharge of 8, charging 7), in the same port mode can support the discharge current 60A, charging current 60A; different port mode discharges current 80A, charging current 60A. Can used for LMO.Ternary lithium battery.LCO(3.7V)battery packs etc.
سمات:
- Temperature protect: Yes
- Disconnect protect: Yes
- Shortage protection: Yes
- Shortage delay: 100-600 uS
- Shortage protect recovery: YES
- Charging Current: 60A
- Current Balance: Yes
الشحنة تحتوي:
1 x White 3S 100A LiFePO4 Lithium Battery Protection PCB Board
Single-cell battery overcharge protect voltage: | 4.21-4.29 V |
---|---|
Single-cell battery overcharge protect recover voltage: | 4.14-4.24V |
Overcharge protect delay | 1.5-2.5S |
Single-cell battery over-discharge protect voltage: | 2.72-2.88 V |
Overcharge protect Current | 100A |
Over-discharge protect Current | 100A |
Over-discharge protect delay | 0.5-1.5S |
Temperature protect | نعم |
Disconnect protect | نعم |
Shortage delay | 100-600 uS |
Charging Current | 60 أ |
Ampere balance (Current) | 60MA |
Voltage balance accuracy | 4.14-4.24V |
وزن المشتريات | 0.015 كجم |
الشحن الأبعاد | 8 × 7 × 1 cm |