This is a digital temperature and humidity sensor module that works with all of the Arduino micro-controllers. Because it is a digital sensor it only necessitates 3 connections, Vcc, GND, and a digital pin for data output. With this sensor, you get two measurements (humidity and temp) while only using one digital pin on the Arduino! This sensor would be perfect for creating an HVAC control system or for controlling something like a food dehydrator.
This humidity and temperature sensor is very popular and has an Arduino Library dedicated to it.
سمات:
- Sensor is composed of a resistive humidity sensing component and an NTC temperature testing component and connects with 8-byte MCU
- MCU outputs a digital code
- Fast response and great anti-interference capability
- Durable and long lasting sensor
- انخفاض استهلاك الطاقة
- Based on the DHT11 sensor architecture
تحديد:
- Operating Voltage: DC 3.3 – 5V
- Current: Max. 2.5mA
- Humidity Measurement range: 20% ~95% | ?5%RH
- Temperature Measurement range: 0?~60? | ?2 ?
- Connections; GND, Vcc, and Signal
- Depth 12mm, Height 7mm, Width 36mm
- Weight 5.0g
Connect DHT11 to Arduino
You can download the Library we used?here:??DHT_Library.zip
رسم اردوينو:
#include <DHT.h> #define dht_apin A0 // Analog Pin sensor is connected to dht DHT; void setup(){ Serial.begin(9600); delay(500); //Delay to let system boot Serial.println("DHT11 Humidity & temperature Sensor "); delay(1000); //Wait before accessing Sensor } void loop(){ //Start of Program DHT.read11(dht_apin); Serial.print("Current humidity = "); Serial.print(DHT.humidity); Serial.print("% "); Serial.print("temperature = "); Serial.print(DHT.temperature); Serial.println("C "); delay(5000); //Wait 5 seconds before accessing sensor again. //Fastest should be once every two seconds. }