This Tube Type Inductive Proximity Sensor Detection Switch NPN DC6-36V 4mm Normally Open switch LJ18A3-8-Z/BX is a component widely used in automatic control industry for detecting, controlling, and non-contact switching. When the proximity switch is close to some target object, it will send out control signal.
When the metal approaches near-proximity switch sensing area, an Edy Current is induced in metal. Which in turn disturbs the magnetic field produced by the Inductive Proximity Sensor. This change is sensed by the sensor.
This inductive proximity switches can be non-contact, no pressure, no spark, quickly issued the electrical command. Accurately reflect the position and the stroke movement mechanism. Positioning accuracy, operating frequency, service life. Easy to install and suitable for harsh environments.
This 4mm proximity sensor can detect a variety of metals, miniature size, long life, low price, shielded type installation, anti-interference ability, 1mm detection distance, using for precise positioning of molds, precision machine tools, and robots.
Features of LJ18A3-8-Z/BX :
- Red LED checks the state of the proximity sensor
- High repeated positioning accuracy
- High switching frequency
- Wide voltage range
- Outer (Theard) Diameter: M18
- Antivibration, dust, water and oil prevention
- Reverse power protection, short circuit protection, directly connecting with PLC
- Can replace small switches and limit switches
الشحنة تحتوي :
1 x DC 6-36V M18 Inductive 8mm NPN-NO Proximity Sensor Switch
| Model number | LJ18A3-8 series |
| External dimensions | M18x1x68 |
| Installation type | Non-shielded |
| Detection distance | 8mm, 15mm, 20mm |
| Setting distance | 6.4 mm |
| مصدر التيار | 6-36Vdc; 90-250Vac, 36Vac, 380Vac, 50/60Hz |
| Output current | DC type: 300mA max; AC Type: 400mA |
| Standard detected object | Mild steel (18x18x1mm) |
| Sensing object | Magnetic metals (if it is not magnetic metals, the sensing distance would decrease) |
| Response frequency | 500Hz |
| Matched mounting bracket | M18 90° bending mounting bracket, M18 straight mounting bracket |
| Output indication | Red LED |
| Short-circuit protection | لا |
| Reverse connection protection | نعم |
| Insulation resistance | 50MΩ min (between charging part and housing) |
| Dielectric strength | 1000Vac, 1min (between charging part and housing) |
| IP Rating | IP65 |
| Operating temperature | -25 to 70 ℃ (13 to 158 ℉) |
| Cable length | 1.2m, PVC cable |
| مادة | Case: Brass-nickel plated; Sensing surface: ABS |
| Alias name | LJ18A3-8 series cylinder inductive proximity switches |
