Main Features

• Rosin-based paste formula: suitable for electronics soldering and desoldering applications.
• Non-halogen activators: made with non-halogen and halide-free activators.
• Suitable for Sn63/Pb37: ideal for common tin-lead solder alloy and solder paste.
• Lead-free solder compatible: can also be used with lead-free solder alloy.
• Clean soldering result: helps create soft, shiny, and high-quality solder joints.
• Strong insulation: insulation resistance is over 100 mega ohms.
• Neutral acidity: non-corrosive when used correctly and cleaned after work.
• Syringe refill use: suitable for refilling paste flux syringes for more accurate application.
• Metal can packaging: supplied in a round metal can for practical workshop storage.

Technical Specifications

Dimensions

Recommended Uses

• Tin soldering and desoldering paste flux for PCB, BGA, PGA, and SMD work.
• Repairing electronics, electrical appliances, PCs, laptops, smartphones, game consoles, and satellite receiver boards.
• Soldering and maintenance of electrical control boards.
• Soldering copper plates, copper connectors, terminals, and wires.
• Use with soldering iron, hot air station, and SMT/BGA rework station.
• Refilling paste flux syringes for controlled workshop application.

How to Use

1. Clean the soldering area from dust, old residue, grease, or oxidation before use.
2. Apply a very small amount of paste flux to the target soldering area.
3. Use a compatible soldering tool according to the board, component, or repair type.
4. Use a suitable soldering iron tip for the target area.
5. Use a soldering iron or hot air tool with suitable power and controlled heat.
6. Clean the soldering iron tip during work using a wet soldering sponge.
7. After soldering or desoldering, clean the area using alcohol or suitable thinner when needed.

Important Notes

• For best results, follow the cleaning and usage steps before soldering.
• Use only a small amount of paste flux; excessive flux may leave unnecessary residue.
• Do not put the soldering iron tip directly inside the flux container.
• Not suitable for fusion welding or flame welding.
• Always choose the correct soldering tool, tip shape, and temperature for the target board or component.

Safety Precautions

• Close the can tightly after use.
• Keep away from children.
• Use in a well-ventilated area during soldering work.
• If the flux touches eyes, wounds, or irritated skin, rinse with enough water and seek professional advice if needed.

Package Includes

• 1 × Golden Soldering Paste Flux 30g for Electronics in metal can

Micro Ohm Quality Note

This product is prepared with clear usage notes to help repair technicians, makers, and workshop users choose the right flux for electronics soldering and desoldering tasks. For best results, clean the target area before soldering, apply a small amount of flux, use controlled heat, and clean the work area after finishing.