TCRT5000 Line Tracking sensor 4 pin HW-870
TCRT5000 Dual Channel Line Tracking sensor 4 pin HW-870
- Operating Voltage: 3.5V-5V
- Supply Current: 15mA
- Optimal Sensing Distance: 3mm
- Designed with the reflected infrared sensor, indicator light.
- Built in a potentiometer for sensitivity control.
- On-board LM393 voltage comparator chip and infrared sensing probe TCRT5000L
- Signal detection sensitivity can adjust
- Reserve all the way more circuits (P3 voltage drawn)
- Description
Description
TCRT5000 Dual Channel Line Tracking sensor 4 pin HW-870
This is TCRT 5000 Dual Channel Line Tracking sensor module.
This IR reflective sensor Module used TCRT5000 IR Sensor to detect color and distance. This sensor module consists of an IR transmitter & an IR receiver. IR Transmitter continuously emits IR signal which is then reflected by an obstacle and is then detected by the IR receiver.
TCRT5000 Infrared Reflective Sensor Module is often used in line following robots, object sorting Robots because this module can sense if a surface is white or black. The measuring distance range from 1mm to 8mm and the central point is about 2.5mm.
There is also an onboard potentiometer to adjust the sensitivity. The infrared diode will be emitting the infrared continually when the module is powered ON, when the emitted infrared light has not been reflected or the strength is not big enough, the receiver diode will in the off state and output pin i.e. DO will be LOW.
Note: The new update with this product is about pin locations. The image shows the sequence of 1) VCC. 2) GND. 3)D0. 4)A0. but a new sequence is 1) VCC. 2)D0. 3)A0. 4) GND.
Application :
- Meter pulse data sampling
- Fax paper shredders detection
- Obstacle detection
- Black and white line detection
Features :
- Designed with the reflected infrared sensor, indicator light.
- Built in a potentiometer for sensitivity control.
- On-board LM393 voltage comparator chip and infrared sensing probe TCRT5000L
- Onboard signal output instructions, the output is the highly effective signal at the same time, the indicator lamp light output signal can be directly and single-chip microcomputer IO connection & middot
- Signal detection sensitivity can adjust
- Reserve all the way more circuits (P3 voltage drawn)
- Using the TCRT5000 infrared reflection sensor
- Output form: digital switch output (0 and 1)
- A fixed bolt hole, convenient installation.
Package Includes :
1 x For Arduino Smart Car TCRT5000 Obstacle Avoidance Infrared Track Sensor Module.
TCRT5000 datasheet: DOWNLOAD
| Operating Voltage (VDC) | 3.5 to 5 |
| Supply Current (A) | 0.015 |
| Optimal Sensing Distance(mm) | 3 |
| Length (mm) | 32 |
| Width (mm) | 14 |
| Height (mm) | 12 |
| Weight (gm) | 3 |
| Shipment Weight | 0.005 kg |
| Shipment Dimensions | 4 × 2 × 2 cm |
Related Products
36W 3A Short Distance IR Hand Sweep ON-OFF Sensor Module
LJ18A3-8-Z/BX M18 8mm sensing DC 6-36V NPN NO cylinder inductive proximity sensor switch
LDR Module 4 pin LM393 Photosensitive Light-Dependent Control Sensor
Flame Sensor infrared Receiver Ignition source detection module IR Flame Sensor Module 3 pin
IR Infrared Obstacle Avoidance Sensor Module KY-032 4 pin
TSOP JS-1838B Infrared Remote Receiver | 38kHz | High Noise Immunity
10mm Light Sensitive Photoresistor LDR
TCRT5000 Reflective IR sensor photoelectric switch
IR Receiving Head VS1838B Remote Control Receiver 3pin
Products With Similar Tags
Line Follower Tracking Module 3 Channels
TCRT5000 Single Channel Line Tracking Sensor Module 3 pin
TSOP JS-1838B Infrared Remote Receiver | 38kHz | High Noise Immunity
Photo Resistor Sensor LDR 5mm 5537
QTR-8RC 8 Channel Line Tracker Reflectance Sensor Array
HC-SR505 Mini Infrared PIR Motion Sensor Infrared Detector Module
PIR Motion Sensor Detector Module HC-SR501
IR Encoder Photoelectric Sensor 4-pin
TCRT5000L 5 Channel Tracking Sensor Tracking Module Infrared Sensor With Wire
TCRT5000 Reflective IR sensor photoelectric switch
