
18650 Battery Insulation Paper Hollow Pack 3S Hole 1pcs
18650 Battery Insulation Paper Hollow Pack 3S Hole 1pcs
- Compatibility: 18650/18500 lithium battery
- Type: 5s Cell
- No. of Mat in Package: 1
- Outer Ring Diameter: 17mm each
- Inner Ring Diameter: 10mm each
- Thickness: 0.25mm
- Color: Dark Green
- Description
- Brand
Description
18650 Battery Insulation Paper Hollow Pack 3S Hole 1pcs
This 3s Electrical Insulating Adhesive Mat for Battery Cell terminal Insulation is a cardboard paper for combine two 18650 battery insulator. Better protection to avoid short circuit on batteries. Easy peel and stick application.
The Outer Ring Diameter is 17mm whereas Inner Ring Diameter is 10mm Thickness: 0.25mm 1Pcs Battery Insulators Adhesive Paper Rings.
- Take off each insulation paper from base paper.
- Put and stick upper hollow adhesive insulation paper on the top of battery positive.
- Put and stick lower solid adhesive insulation paper on the negative.
- Then, you can weld Ni tape or Ni-plated steel plate with positive, negative to make the battery pack.
Note: Colors in the image may vary from the Actual Product.
Features :
- Better protection to avoid short circuit on batteries.
- Perfect Build for DIY battery packs!
Package Includes :
1 x 3s Hole Electrical Insulating Adhesive Mat for Battery Cell terminal Insulation
| Compatibility | 18650/18500 lithium battery |
| Type | 3 Cell |
| No. of Mat in Package | 1 |
| Outer Ring Diameter(mm) | 17 |
| Inner Ring Diameter(mm) | 10 |
| Thickness (mm) | 0.25 |
| Color | Dark Green |
| Shipment Weight | 0.002 kg |
Related Products
4 x AA Battery Back To Back Holder Case Box
2 x 1.5V AA Battery Holder Without Cover
3 x 1.5V AA Battery Holder Without Cover
4 x 1.5V AA Battery Holder Without Cover
18650 Battery Insulation Paper Hollow Pack 6S Hole (1pcs Only Not Sheet)
Coin Cell Battery Holder Case for CR2025/CR2032 PCB Mount 1PCS
18650 Battery Case Holder 4 cells Black Plastic Storage Box Case Holder for Battery 4 x 18650 Cell Box, without Cover
1 x 1.5V AA Battery Holder Without Cover
Products With Similar Tags
18650 3 X 5 Battery Spacer Holder Shell 1PCS
18650 Battery Holder with Wires – Single Cell Case
INR 18650 Li-ion Battery 3.7v Rechargeable INR (Recycled) 1000-1500mA
Rechargeable Li-ion Samsung 18650 Battery High Drain INR 18650-30Q 3000mAh 3.6V 15A Original
BMS 1S 3.7V Lithium Battery Protection Board for Polymer 18650 Bonding Pad (can Spot/Weld) 3A Overcurrent Value
TPW INR18650 Li-ion Rechargeable Battery 3.7V 7.4Wh 2000mAh – Flat Top (Single Cell)
18650 3 X 6 Battery Spacer Holder Shell 1PCS
BMS 1S 3A 3.7V 2MOS Lithium Battery Protection Board for Polymer 18650 with Nickel Strip
EU Universal 18650 Lithium Battery Charger 1 Cell
18650 Li-ion Battery 3.7v Rechargeable ICR (Recycled) 1000-1500mA
18650 Battery Insulation Paper Hollow Pack 4S Solid (1pcs Only Not Sheet)
18650 Battery Case Holder 3 cells With Switch Black Plastic Storage Box Case Holder For Battery 3 x 18650 Cell Box, Without Cover
More From This Brand
Stepper Motor DC 5V 28BYJ-48
Slim Power Supply 12V 5A 60W Slim Metal Switching Power Supply (AC 190–240V 50/60Hz)
JST 4 Pin XH2.54 Male and Female Connector Plug with Wire Cable 20CM
Ultraviolet UV LED 5mm 395nm
AD20P-1230A Brushless DC Water Pump 12V-4.8W-240 L/H-3meters height-IP68
4WD Big Acrylic Plate Panel For Smart Car Chassis
Aluminium Heat sink Heatsink 6 Fins (100 x 40 x 20 mm) White
DC 3-6 V Mini Micro Submersible Water Pump 120L/H
JST Connector 2.54mm Pitch 3 pin XH2.54 Polarized Male on PCB XH-3A
18650 Battery Case Holder 3 cells With Switch Black Plastic Storage Box Case Holder For Battery 3 x 18650 Cell Box, Without Cover
2-Pin JST-SM Male Female Connector Cable Pair 10cm for Battery and LED Projects