Description
iLock 5130 LED Strip Light 6500K 12V 5m 120 LED/m IP20
The LED Strip Light iLock 5130 is a 5-meter 12V DC cool-white lighting strip designed for indoor decorative and task lighting. With 120 LEDs per meter, it provides smooth and consistent illumination for kitchens, offices, shelves, ceilings and work areas.
This strip must be powered from a suitable 12V DC power supply and must not be connected directly to AC mains electricity.
Key Features
- 6500K Cool White: Crisp white illumination suitable for modern interiors and task lighting.
- 120 LEDs per Meter: Dense LED spacing for more uniform illumination.
- 5 Meter Roll: Total strip length of 5 meters.
- 12V DC Operation: Requires a suitable regulated 12V DC power supply.
- 10W per Meter: Approximate total load is 50W for the complete 5-meter roll.
- Cuttable Every 2.5cm: Can be shortened at the marked cutting points.
- 8mm Copper PCB: High-quality copper PCB designed for stable electrical performance.
- 3M Adhesive Backing: Strong double-sided adhesive for easy mounting on clean, smooth and dry surfaces.
- IP20 Rated: Designed for indoor use in dry environments.
- 30,000-Hour Lifespan: Rated lifetime up to 30,000 hours.
- 5-Year Warranty: Warranty against manufacturing defects.
Technical Specifications
| Brand | iLock |
|---|
| Model | 5130 |
|---|
| Product Type | LED Strip Light |
|---|
| Operating Voltage | 12V DC |
|---|
| Color Temperature | 6500K Cool White |
|---|
| Length | 5 Meter |
|---|
| LED Density | 120 LED/m |
|---|
| Total LED Count | Approximately 600 LEDs |
|---|
| Power Consumption | 10W/m |
|---|
| Total Power | Approximately 50W for 5m |
|---|
| PCB Width | 8mm |
|---|
| Cutting Interval | Every 2.5cm |
|---|
| Protection Rating | IP20 |
|---|
| Luminous Efficiency | 110 lm/W |
|---|
| Operating Temperature | -20°C to +45°C |
|---|
| Adhesive | 3M Double-Sided Adhesive |
|---|
| Rated Lifespan | Up to 30,000 Hours |
|---|
| Country of Origin | Made in Egypt |
|---|
| Warranty | 5 Years |
|---|
Power Supply Requirements
The full 5-meter strip consumes approximately 50W. At 12V, this corresponds to about 4.2A, so a 12V power supply rated at 5A or higher is recommended for the full roll.
A suitable option is the 12V 5A 60W Slim Power Supply.
Applications
- Ceiling and cove lighting
- Kitchen cabinets
- Office and workspace lighting
- Shelves and display units
- Interior decorative lighting
- Task lighting
Related Products
Browse more products from the iLock brand or explore more LED Strip products. For powering the complete 5-meter roll, see the 12V 5A 60W Slim Power Supply.
Important Installation Notes
- Do not connect directly to 220V AC mains.
- Use a suitable 12V DC regulated power supply.
- Cut only at the marked cutting points.
- Install on a smooth, clean and dry surface.
- Do not sharply bend, crush or twist the LED strip.
- IP20 is intended for dry indoor environments only.
