Description
BeagleBone Blue is an all-in-one Linux-based computer for robotics, integrating onto a single small (3.5″ x 2.15″) board the Octavo OSD3358 microprocessor together with wifi/BlueTooth, IMU/barometer, power regulation, and state-of-charge LEDs for a 2-cell LiPo, H-Bridges, and discrete connectors for 4 DC motors+encoders, 8 servos, and all of the commonly-needed buses for additional peripherals in embedded applications. Fully open-source and actively supported by a strong community, the real-time performance, flexible networking, and rich set of robotics-oriented capabilities make building mobile robots with the Blue fast, streamlined, affordable, and fun.
Features:
- Wi-Fi 802.11 b/g/n, Bluetooth 4.1, and BLE enabled
- USB 2.0 client and host ports
- MicroSD card slot
- Features 9-axis IMU and barometer sensors
- Motor control: 8x 6V servo outputs, 4x DC motor outputs, 4x quadrature encoder inputs
- Software compatibility: Debian, Ardupilot, ROS, and Cloud9
Package Includes:
1 x Beaglebone Blue Board
| RAM | 512MB DDR3 |
|---|
| Flash Storage | 4GB 8-bit |
|---|
| Battery | 2-cell LiPo, 6-16V charger input |
|---|
| WIFI | 802.11 b/g/n |
|---|
| Bluetooth Version | 4.1 and BLE |
|---|
| Motor Control | 8 6V servos out, 4 DC motor out, 4 quad enc in |
|---|
| Sensors | 9 axes IMU, Barometer |
|---|
| Connectivity | HighSpeed USB 2.0 client and host |
|---|
| Length (mm) | 175 |
|---|
| Width (mm) | 112 |
|---|
| Height (mm) | 15 |
|---|
| Weight (gm) | 35 |
|---|
| Shipping Weight | 0.04 kg |
|---|
| Shipping Dimensions | 18 × 11 × 4 cm |
|---|
DATASHEET
DOWNLOAD
