DS18b20 Waterproof Digital Temperature Sensor 1 meter wire
The DS18b20 r is a waterproof digital temperature sensor with a 1-meter cable and stainless-steel probe. It provides accurate temperature readings over a 1-Wire digital interface.
المسبار DS18b20 هو حساس حرارة رقمي مقاوم للماء مزود بسلك طوله 1 متر وأنبوب فولاذي مقاوم للصدأ، ويعمل بواجهة اتصال رقمية من نوع 1-Wire لقياس درجة الحرارة بدقة عالية.
- Description
Description
1. Overview
The DS18b20 temperature sensor combines the accuracy of the Dallas DS18B20 chip with a durable waterproof stainless-steel enclosure and long 1-meter cable.
It communicates through a 1-Wire digital bus, allowing multiple sensors to connect to a single data line.
This makes it perfect for environmental monitoring, liquid temperature sensing, and embedded electronics.
2. Features
-
Digital temperature sensor (DS18B20 core)
-
Fully waterproof stainless-steel probe
-
Cable length: 1 meter
-
Interface: 1-Wire digital bus
-
Temperature range: –55°C to +125°C
-
Accuracy: ±0.5°C (–10°C to +85°C)
-
Works directly with Arduino, ESP32, Raspberry Pi, etc.
-
Pre-soldered and ready for direct use
3. Applications
-
Temperature monitoring in liquids or outdoor environments
-
Industrial and laboratory temperature measurement
-
Smart farming and IoT systems
-
Aquarium and water tank sensing
-
Embedded systems and prototyping
4. Electrical Characteristics (Typical Values)
| Parameter | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Supply Voltage | VDD | 3.0 | 3.3 | 5.5 | V |
| Temperature Range | T | -55 | – | 125 | °C |
| Accuracy | – | – | ±0.5 | – | °C |
| Interface | – | 1-Wire | – | – | – |
| Resolution | – | 9–12 bit | – | – | – |
| Cable Length | – | – | 1.0 | m |
5. Mechanical Specifications
| Parameter | Value |
|---|---|
| Probe Material | Stainless Steel |
| Probe Diameter | 6 mm |
| Probe Length | 50 mm |
| Cable Length | 1 m |
| Cable Type | PVC Insulated |
| Wires | Red (VCC), Black (GND), Yellow (DATA) |
DS18b20 — حساس حرارة رقمي مقاوم للماء بطول سلك 1 متر (واجهة 1-Wire)
1. نظرة عامة
يجمع DS18b20 بين دقة شريحة DS18B20 المعروفة وجودة التصميم المقاوم للماء، مع غلاف فولاذي متين وسلك بطول 1 متر.
يستخدم واجهة اتصال 1-Wire الرقمية التي تسمح بتوصيل عدة حساسات على خط بيانات واحد، مما يجعله مثاليًا للأنظمة الذكية ومراقبة البيئات والسوائل.
2. المميزات
-
حساس حرارة رقمي مقاوم للماء
-
شريحة DS18B20 دقيقة الأداء
-
أنبوب فولاذي مقاوم للصدأ
-
سلك بطول 1 متر
-
مدى قياس واسع من –55 إلى +125 م°
-
دقة ±0.5 م° في المدى النموذجي
-
متوافق مع Arduino وESP32 وRaspberry Pi
-
جاهز للاستخدام المباشر بدون لحام
3. الاستخدامات
-
قياس درجة الحرارة في السوائل أو البيئات الخارجية
-
مشاريع المراقبة البيئية والذكية
-
تطبيقات الزراعة الذكية وإنترنت الأشياء
-
أنظمة الأحواض والخزانات
-
مشاريع البحث والتجارب التعليمية
4. الخصائص الكهربائية (قيم نموذجية)
| الخاصية | الرمز | الحد الأدنى | النموذجي | الأقصى | الوحدة |
|---|---|---|---|---|---|
| جهد التشغيل | VDD | 3.0 | 3.3 | 5.5 | فولت |
| مدى درجة الحرارة | T | -55 | – | 125 | °م |
| الدقة | – | – | ±0.5 | – | °م |
| نوع الواجهة | – | 1-Wire | – | – | – |
| الدقة الداخلية | – | 9–12 بت | – | – | – |
| طول السلك | – | – | 1.0 | متر |
5. المواصفات الميكانيكية
| الخاصية | القيمة |
|---|---|
| مادة المسبار | فولاذ مقاوم للصدأ |
| قطر المسبار | 6 مم |
| طول المسبار | 50 مم |
| طول السلك | 1 متر |
| نوع السلك | PVC معزول |
| ألوان الأطراف | أحمر (VCC)، أسود (GND)، أصفر (DATA) |
Related Products
K-type Thermocouple Wire Cable 50Cm
LM35DZ Temperature Sensor – Original Analog IC
DS18B20 Digital Temperature Sensor
Raindrop Water Sensor Module
IR Flame Sensor Module 4 pin
XH-W3001 AC 220V 1500W Digital Microcomputer Thermostat Switch HW-735
Flame Sensor infrared Receiver Ignition source detection module IR Flame Sensor Module 3 pin
DHT11 Temperature And Humidity Sensor Module with LED
Products With Similar Tags
Analog TDS Sensor Module V1.0 (Gravity-style) — Waterproof Probe, 5V, Analog Output
