Main Features

• Large 10000mAh capacity: suitable for longer runtime in compatible drones, RC models, and portable power systems.
• 14.8V nominal voltage: designed for 4S lithium polymer systems.
• 4S cell configuration: four cells connected in series for higher voltage output.
• 25C discharge rating: supports high-current loads such as motors, UAVs, and performance electronics.
• 5C charge support: allows fast charging when using a suitable balance charger and safe charging settings.
• High energy density: lithium polymer technology provides strong capacity in a compact battery pack.
• Stable voltage output: suitable for systems that need consistent power delivery during operation.
• Wide application range: useful for drones, RC cars, planes, boats, robotics, backup power, and DIY power projects.

Technical Specifications

Compatibility Notes

• Use only with devices designed for 14.8V 4S lithium polymer battery packs.
• Check the discharge connector type before installation because the supplied connector may vary by batch.
• Make sure the battery size and weight are suitable for the drone, RC model, or project body.
• Use a compatible 4S lithium polymer balance charger only.
• Confirm motor, controller, and wiring current ratings before using this battery with high-power systems.

Recommended Uses

• Drones and UAVs that support 4S high-capacity battery packs.
• RC cars, planes, boats, and helicopters requiring 14.8V lithium polymer power.
• Robotics and automation projects with high current demand.
• Portable power solutions and field electronics projects.
• Backup power applications where a rechargeable high-capacity pack is required.
• High-performance DIY electronics and motor-driven systems.

Charging and Use Instructions

1. Use only a lithium polymer balance charger that supports 4S battery packs.
2. Set the charger to 4S lithium polymer mode before charging.
3. Connect the main discharge connector and balance connector according to the charger instructions.
4. Charge in a safe area away from flammable materials.
5. Confirm cell balance before use, especially before high-current operation.
6. Do not over-discharge the battery during operation.
7. Allow the battery to cool before recharging after heavy use.
8. Store the battery at storage voltage if it will not be used for a long period.

Important Safety Notes

• Use only with devices and chargers designed for 4S lithium polymer batteries.
• Do not short-circuit the battery terminals.
• Do not puncture, crush, bend, open, or disassemble the battery pack.
• Do not expose the battery to fire, water, direct heat, or strong impact.
• Stop using the battery if it becomes swollen, damaged, overheated, or leaking.
• Do not leave the battery charging unattended.
• Use a fire-resistant charging bag or safe charging container whenever possible.
• Dispose of damaged lithium polymer batteries according to safe battery recycling rules.

Package Includes

• 1 × Lithium Polymer Battery 14.8V 4S 10000mAh 25C 5C Charge

Micro Ohm Quality Note

This product is prepared with clear voltage, capacity, discharge, charging, and safety notes to help customers select the correct high-capacity battery for drones, RC systems, robotics, and high-performance projects. Always compare voltage, connector type, size, discharge rating, charger compatibility, and device requirements before use.