Metallic Solder Paste PRO 15g for PCB/SMD/BGA/PGA
Metallic Solder Paste PRO 15g for PCB/SMD/BGA/PGA
- Description
- Reviews (0)
Description
Metallic Solder Paste PRO 15g for PCB/SMD/BGA/PGA
Metallic Solder Paste PRO (Mixture of tin alloy powder & paste flux) for repairing electronic boards, PCs, Laptops, Smartphones, playstation, Satellite Receiver and all sensitive electronic appliances by using tin soldering iron, hot air soldering station and SMT/BGA rework station.
Specification:
• Particle Size:25-40 Micron.
• Alloy: Sn63/Pb37.
• Melting Point: 185-240 Celsius.
Features:
• Suitable to stencil printing (holes larger than 0.40mm).
• Good conductivity and oxidation resistance.
• High purity, stable viscosity and soft soldering.
• Bright and full solder joints.
• No residue solid after rework and easy cleaning.
• Halogen free.
• 75% Metal Content.
Usage:
• Repairing electronic boards such as PCB/SMD/BGA/PGA for PCs, Laptops, Smartphones, playstation, Satellite Receiver and all sensitive electronic appliances.
• Reballing BGA chipset with reballing stencil (holes larger than 0.40mm).
• Repairing phones, as well as replacement SMD component, micro switches and charging connectors.
• Soldering electrical control boards.
• Soldering all copper alloys, wires, lithium ion batteries and solderable surfaces as nickel strips.
Usage Recommendations (very important):
• Follow safety precautions & notes.
• Clean the surface (Clear any residues or dust).
• Put a very little bit of solder paste before soldering.
• Use a suitable soldering iron tip with the target area.
• Use a suitable soldering iron with the target size.
• Use a suitable soldering station with the target component.
• Use a wet soldering sponge for cleaning the tip and during soldering.
• Use thinner or any alcohol for cleaning.
Notes:
• For best results, follow the usage recommendations.
• Don’t put soldering iron tip in the solder paste.
• Not suitable with welding by fusion or flame.
Safety Precautions:
• Close after using & keep away from children.
• Use enough water when eyes or wounds are touched.
Appearance:
The solder paste is a soft paste, packaged in a round plastic can – net weight 15g.
Thanks for Your Trust


Only logged in customers who have purchased this product may leave a review.
Related Products
RELIFE No-clean Soldering Paste RL-402 Sn63-Pb67 183°C Solder Paste 40g
Joker Soldering Paste Flux 50g for Multi-Purpose
Solder wire Pipe 1mm 14g
Products With Similar Tags
5x7 cm Universal FR4 PCB Prototype Board Single-Sided 2.54mm Hole Pitch Dots With Green Musk
Super Solder Wire 70/30 – 0.6mm, 250g Spool (Made in Taiwan)
PCB Thermal Transfer Paper A4 Size 1pcs
PCB board DOT FR2 5*7 5x7 cm2
MIJING K23 Pro Multifunction PCB Holder / Repair Fixture for Smartphone Motherboards, IC & BGA Rework
PCB board DOT FR2 9*15 cm2
ESP32-S3-N16R8 High-Performance WIFI BLE5 SMD Module
PCB Board 7x9 cm Universal FR4 PCB Prototype Board Single-Sided 2.54mm Hole Pitch Dots With Green Musk
Royalohm 330Ω 0805 SMD Chip Resistor 1% 1/8W
RELIFE Solder Paste RL-404S 138°C
Small PCB Manual Drill 0.3-3.5mm x 90mm

Reviews
There are no reviews yet.