PCB Micro Limit Switch 1A 125VAC Microswitch
PCB Micro Limit Switch 1A 125VAC Microswitch
- Max. Switching voltage: 125 V
- Max. switching current: 1 A
- Max. switching frequency per minute: 60
- Contacts: NO, NC, COM
- Contact resistance: 100 mΩ
- Description
- Brand
Description
PCB Micro Limit Switch 1A 125VAC Microswitch
This Limit switch is manufactured from glass-reinforced thermoplastic to give rugged performance. And is available as single-pole double-throw with an actuator attached. Terminals are suitable for PCB mounting at a standard pitch. The actuator is stainless steel and is 13mm long.
Specification
- Dimensions: 12.7mm x 9.5mm x 5.6mm
- Lever type:13mm lever,
- Rating: 125VAC 1A
- Terminals: 3
- Operating Temperature: -255 to +65
- Electrical life: 30,000+ cycles
- Mechanical life: 100,000+ cycles
The Microswitch Limit Switch 1A 125V AC contains one group of contacts for switching. Presence of the lever.
Often used as a limit switch (end) in household appliances and amateur radio structures.

Package Includes :
1 x Microswitch Limit Switch 1A 125V AC
| Item Type: | Micro Limit Switch |
|---|---|
| Voltage Rating (V): | 125 VAC |
| Current Rating (A): | 1A |
| With Cable (Y/N): | No |
| Contact Resistance (ohm) | 30mΩ |
| Insulation Resistance (MOhm) | 100 |
| Dielectric Strength | 1000VAC 1Minute |
| Protection Standard | IP40 |
| Mech. and Electrical Life | ≈ 30,000 |
| Length (mm): | 12.9 |
| Width (mm): | 6 |
| Height (mm): | 6.5 |
| Weight (g): | 1 (approx) (each) |
| Shipping Weight | 0.03 kg |
| Shipping Dimensions | 3 × 2 × 1 cm |
Related Products
DRV8825 Stepper Motor Driver with Aluminum Heat Sink
MPU-6050 3-Axis Accelerometer and Gyro Sensor GY-521
400 Tie Points Contacts Mini Circuit Experiment Solderless Breadboard
Transparent Acrylic Case Shell Enclosure Gloss Box For Arduino Mega 2560 R3
USB TO UART TTL FTDI 5V 3.3V FT232RL Download Cable To Serial Adapter Module For Arduino
Wires 20 cm Female to Female Jumper Wires 10 wires
TTP223 Capacitive Touch Key Module
Cable for Arduino Nano (USB 2.0 A to USB 2.0 Mini B) 30cm
3D Printer CNC Mechanical End Stop Switch Module limit switch
DHT11 Temperature And Humidity Sensor Module with LED
Products With Similar Tags
Arduino Uno R3 SMD CH340G ATmega328p Development Board Compatible Without Cable
MPU-6050 3-Axis Accelerometer and Gyro Sensor GY-521
MAX7219 8 Digit 7-Segment Digital Tube Display Module Control Module
Aluminum Flexible Coupling Coupler Helical Shaft 8mm x 8mm
AMS1117 5V Step-Down Power Supply Module Unsoldered
Transparent Acrylic Case Shell Enclosure Gloss Box For Arduino Mega 2560 R3
Transparent Acrylic Case Shell Enclosure Gloss Box Case For Arduino UNO R3
LCD1602 Parallel LCD Display with Blue Backlight 1602A
IIC/I2C Serial Interface Adapter Module pcf8574 HW-061
Mini SD Card Reader Module (not Soldered)
24V/12V to 5V 5A Power Module DC-DC XY-3606 Buck Step Down Power Converter
More From This Brand
AD20P-1230A Brushless DC Water Pump 12V-4.8W-240 L/H-3meters height-IP68
JGA25-370 12V 210RPM DC Gear Motor 12kg.cm
6mm Hex Brass Motor Coupling for Smart Robot Car Wheel – 18mm Length
JGA25-370 12V 133RPM DC Gear Motor 20kg.cm
Slim Power Supply 12V 5A 60W Slim Metal Switching Power Supply (AC 190–240V 50/60Hz)
4mm Hex Brass Motor Coupling for Smart Robot Car Wheel – 18mm Length
Slim Power Supply 12V 12.5A 150W Slim Metal (AC 190–240V 50/60Hz)
JST PH2 2mm 3 Pin Connector Set Wire Double End Female to Female 30CM White
JST PH2 2mm 4 Pin Connector Set Wire Double End Female to Female 30CM White
JGA25-370 12V 250RPM DC Gear Motor 8.8kg.cm
JH-8675 BMS 1S 2A 3.7V Lithium Battery Charger Protection Module with Nickel Strip
