Overview
The SUNSHINE SS-C210-I is a straight “I” (needle) soldering tip built for T210-style micro handles. Its fine, cylindrical geometry focuses heat into a tiny contact area—perfect for 0201/0402 passives, tight pad repairs, FPC tails, jumpers, and precision touch-ups where bulkier tips get in the way. Clean iron plating, fast thermal response, and microscope-friendly visibility make it a daily driver for meticulous rework.
✅ “I” needle geometry for pinpoint pads and ultra-fine parts
🎯 Microsoldering control under the microscope with minimal visual blockage
⚡ Quick heat transfer and recovery for steady, glossy joints
🧰 T210-compatible—drop-in fit for T210 micro handpieces/stations
🧪 Clean wetting thanks to iron-plated copper core
🛡️ ESD-bench friendly for sensitive electronics
📦 1 tip included (sealed)
Why Technicians Choose SS-C210-I
✅ Pinpoint accuracy: the slim cylindrical end reaches pads between shields and connectors.
✨ Better looking joints: stable temperature helps avoid dull or grainy finishes on tiny pads.
🔍 See what you’re doing: the narrow silhouette keeps the work area visible under magnification.
🧩 Easy pairing: works seamlessly with no-clean flux pens and fine solder wire (0.2–0.4 mm).
🧰 Everyday precision: ideal for sensor pads, codec pins, jumper anchors, and pad rehab.
Ideal Use Cases
Fine-pitch SMD: 0201/0402 passives, QFN corners, PMIC side pins.
Connector service: FPC tails, USB-C pad touch-ups, board-to-board headers.
Pad re-tinning: polish and re-tin oxidized pads after hot-air work.
Jumpers & enamel wire: tack ultra-fine jumpers with minimal alloy.
Rework in tight clearances: reach past frames, shields, or sockets without contact.
Pro tip: use the very end of the “I” tip for spot heating, and slightly “roll” the cylinder for micro drag across two or three pads with a thin bead of solder.
Technique & Workflow
Flux first: lay a film of no-clean flux for quick wetting.
Tiny feed: use 0.2–0.3 mm solder; let the joint “drink,” don’t flood.
Angle & touch: approach at ~20–30° and keep pressure feather-light.
Bridge cleanup: add flux, drop temperature slightly, wick with fresh braid.
Tip care: re-tin often; clean in brass wool (avoid wet sponge shock).
Specifications
| Category | Parameter | Value |
|---|
| Model | Marking | SS-C210-I (printed on package/tip) |
| Geometry | Shape | I (Straight needle) |
| Compatibility | Handle/Stations | T210-style micro handle soldering stations |
| Core & Plating | Material | Copper core with iron plating (protective layers) |
| Best For | Tasks | Ultra-fine SMD, pad repair, FPC tails, micro jumpers |
| Care | Cleaning | Brass wool / tip cleaner; keep lightly tinned |
| In-Box | Contents | 1× SS-C210-I tip (sealed) |
What’s in the Box
📦 1× SUNSHINE SS-C210-I Soldering Tip (Straight “I”)
SUNSHINE SS-C210-I سنّ لحام لمقبض T210 — شكل مستقيم “I” (إبرة دقيقة)
لمحة عامة
SUNSHINE SS-C210-I هو سنّ مستقيم “I” (إبرة) مخصّص لـ مقبض T210. طرفه الرفيع بيوصل الحرارة في مساحة صغيرة جدًا، عشان شغل 0201/0402، ترميم بادز دقيقة، نهايات FPC، جَمبرات شعر، وتتش-أب سريع في أماكن ضيّقة. طبقة طلاء الحديد النظيفة مع استجابة حرارية سريعة ورؤية ممتازة تحت الميكروسكوب بتخليه اختيار يومي لشغل الدقة.
✅ هندسة “I” على شكل إبرة لمس pads صغيرة جدًا
🎯 تحكّم عالي تحت الميكروسكوب من غير ما يحجب الرؤية
⚡ نقل حرارة سريع واسترجاع ثابت لوصلات لامعة
🧰 متوافق مع T210—بيتركّب مباشرة على مقبض T210
🧪 بلل نظيف بفضل قلب نحاس مطلي حديد
🛡️ مناسب لبنش ESD مع دوائر حسّاسة
📦 قطعة واحدة داخل العبوة
ليه الفنيين بيختاروه
✅ دقة موضعية: الطرف الإبري يوصل لمناطق بين الشيلدات والسوكيتات.
✨ تشطيب أنضف: ثبات الحرارة يقلّل البهتان على البادز الصغيرة.
🔍 مجال رؤية أكبر: جسم السن الرفيع ما يغطيش منطقة الشغل.
🧩 توافق ممتاز مع الفلكس والسلك الرفيع: استخدم 0.2–0.3 مم.
🧰 عملي للمهام اليومية الدقيقة: بادز حساسة، أطراف FPC، وتثبيت جَمبرات.
استخدامات مثالية
SMD دقيق جدًا: 0201/0402، زوايا QFN، أطراف PMIC الجانبية.
سوكيتات: نهايات FPC، تاتش-أب على USB-C، هيدرز بورد-لبورد.
إعادة قصدرة بادز: بعد فك الشيلد بالهوت إير.
جَمبرات وأسلاك مينا: تثبيت سريع بكمية قصدير قليلة جدًا.
أماكن ضيّقة: الوصول من غير ما تلمس فريمات أو شيلدات.
💡 نصيحة: استخدم قُمّة سنّ “I” للتسخين الموضعي، ومع تحريك خفيف تقدر تعمل “سحبة قصيرة” عبر 2–3 بادز بخرزة قصدير صغيرة جدًا.
تكنيك وخط سير
فلكس الأول: طبّق فيلم رفيع من no-clean.
تغذية قليلة: سلك 0.2–0.3 مم يكفي؛ سيب الوصلة “تشرب”.
زاوية ولمسة: 20–30° وضغط خفيف جدًا—السخونة تعمل الشغل.
سحب الجسور: فلكس + درجة أقل شوية + فتيلة جديدة.
العناية بالسن: قصترة متكرّرة وتنضيف بـ صوف نحاس (بدون إسفنجة مبلولة).
المواصفات الفنية
| الفئة | البند | القيمة |
|---|
| الموديل | المطبوع | SS-C210-I |
| الشكل | الهندسة | I مستقيم (إبرة) |
| التوافق | المقبض/المحطة | مقبض T210 ومحطّات T210 |
| الخامة | القلب/الطلاء | قلب نحاس مع طلاء حديد |
| أفضل استخدام | المهام | SMD دقيق جدًا، ترميم بادز، نهايات FPC، جَمبرات |
| الصيانة | التنضيف | صوف نحاس / Tip Cleaner؛ حافظ على قصترة خفيفة |
| محتويات العبوة | — | سنّ واحد SS-C210-I (مغلف) |
محتويات العبوة
📦 سنّ SUNSHINE SS-C210-I (إبرة مستقيمة) — قطعة واحدة
| JBC C210-I style tips | needle soldering tip | T210 I tip |
| Mechanic / QUICK I tips | straight I geometry | micro needle tip |
| OSS / KSGER T210 tips | fine point tip | T210 soldering cartridge |
| Generic T210 I-form | ultra fine tip | precision needle solder tip |
Admin1 (#289) –
{“action”:”status_change”,”payload”:{“from”:”new”,”to”:”draft”,”by”:”Admin1″},”time”:”2025-12-06 20:56:55″}
Mazin (#9820) –
{“action”:”view”,”payload”:{“screen”:”edit_product”,”user”:”Mazin”},”time”:”2026-02-19 13:21:28″}
Mazin (#9820) –
{“action”:”edit_diff”,”payload”:{“by”:”Mazin”,”diff”:[]},”time”:”2026-02-19 13:32:31″}
Mazin (#9820) –
{“action”:”status_change”,”payload”:{“from”:”draft”,”to”:”pending”,”by”:”Mazin”},”time”:”2026-02-19 13:32:36″}
Mazin (#9820) –
{“action”:”edit_diff”,”payload”:{“by”:”Mazin”,”diff”:{“core:title”:{“old”:”Draft – X8268″,”new”:”SUNSHINE Soldering Tip SS-C210-I for T210 Handle — Straight “I” Needle Geometry”},”core:excerpt”:{“old”:””,”new”:”
SUNSHINE SS-C210-I Soldering Tip<\/strong> — straight “I” needle<\/strong> for T210 handles; perfect for ultra-fine SMD, FPC tails, pad re-tinning, jumpers, and tight-clearance touch-ups. Clean wetting, fast recovery.<\/p>\r\n
SUNSHINE SS-C210-I سنّ لحام إبرة مستقيمة<\/strong> لمقبض T210—مثالي لـ SMD دقيق جدًا، نهايات FPC، ترميم بادز، جَمبرات، وتتش-أب في المساحات الضيقة. قصترة نظيفة واسترجاع سريع.<\/p>“},”core:content”:{“old”:””,”new”:”
Overview<\/h3>\r\n
The SUNSHINE SS-C210-I<\/strong> is a straight “I” (needle)<\/strong> soldering tip built for T210-style micro handles<\/strong>. Its fine, cylindrical geometry focuses heat into a tiny contact area—perfect for 0201\/0402 passives, tight pad repairs, FPC tails, jumpers, and precision touch-ups<\/strong> where bulkier tips get in the way. Clean iron plating, fast thermal response, and microscope-friendly visibility make it a daily driver for meticulous rework.<\/p>\r\n
✅ “I” needle geometry<\/strong> for pinpoint pads and ultra-fine parts
🎯 Microsoldering control<\/strong> under the microscope with minimal visual blockage
⚡ Quick heat transfer<\/strong> and recovery for steady, glossy joints
🧰 T210-compatible<\/strong>—drop-in fit for T210 micro handpieces\/stations
🧪 Clean wetting<\/strong> thanks to iron-plated copper core
🛡️ ESD-bench friendly<\/strong> for sensitive electronics
📦 1 tip included<\/strong> (sealed)<\/p>\r\n\r\n\r\n
\r\n\r\n
Why Technicians Choose SS-C210-I<\/h3>\r\n
\r\n \t- \r\n
- \r\n
- \r\n
- \r\n
- \r\n
✅ Pinpoint accuracy:<\/strong> the slim cylindrical end reaches pads between shields and connectors.<\/p>\r\n<\/li>\r\n \t
✨ Better looking joints:<\/strong> stable temperature helps avoid dull or grainy finishes on tiny pads.<\/p>\r\n<\/li>\r\n \t
🔍 See what you’re doing:<\/strong> the narrow silhouette keeps the work area visible under magnification.<\/p>\r\n<\/li>\r\n \t
🧩 Easy pairing:<\/strong> works seamlessly with no-clean flux pens and fine solder wire (0.2–0.4 mm).<\/p>\r\n<\/li>\r\n \t
🧰 Everyday precision:<\/strong> ideal for sensor pads, codec pins, jumper anchors, and pad rehab.<\/p>\r\n<\/li>\r\n<\/ul>\r\n\r\n
\r\n\r\n
Ideal Use Cases<\/h3>\r\n
\r\n \t- \r\n
- \r\n
- \r\n
- \r\n
- \r\n
Fine-pitch SMD:<\/strong> 0201\/0402 passives, QFN corners, PMIC side pins.<\/p>\r\n<\/li>\r\n \t
Connector service:<\/strong> FPC tails, USB-C pad touch-ups, board-to-board headers.<\/p>\r\n<\/li>\r\n \t
Pad re-tinning:<\/strong> polish and re-tin oxidized pads after hot-air work.<\/p>\r\n<\/li>\r\n \t
Jumpers & enamel wire:<\/strong> tack ultra-fine jumpers with minimal alloy.<\/p>\r\n<\/li>\r\n \t
Rework in tight clearances:<\/strong> reach past frames, shields, or sockets without contact.<\/p>\r\n<\/li>\r\n<\/ul>\r\n
Mazin (#9820) –
{“action”:”view”,”payload”:{“screen”:”edit_product”,”user”:”Mazin”},”time”:”2026-02-19 13:32:42″}
Mazin (#9820) –
{“action”:”edit_diff”,”payload”:{“by”:”Mazin”,”diff”:{“core:content”:{“old”:”
Overview<\/h3>\r\n
The SUNSHINE SS-C210-I<\/strong> is a straight “I” (needle)<\/strong> soldering tip built for T210-style micro handles<\/strong>. Its fine, cylindrical geometry focuses heat into a tiny contact area—perfect for 0201\/0402 passives, tight pad repairs, FPC tails, jumpers, and precision touch-ups<\/strong> where bulkier tips get in the way. Clean iron plating, fast thermal response, and microscope-friendly visibility make it a daily driver for meticulous rework.<\/p>\r\n
✅ “I” needle geometry<\/strong> for pinpoint pads and ultra-fine parts
🎯 Microsoldering control<\/strong> under the microscope with minimal visual blockage
⚡ Quick heat transfer<\/strong> and recovery for steady, glossy joints
🧰 T210-compatible<\/strong>—drop-in fit for T210 micro handpieces\/stations
🧪 Clean wetting<\/strong> thanks to iron-plated copper core
🛡️ ESD-bench friendly<\/strong> for sensitive electronics
📦 1 tip included<\/strong> (sealed)<\/p>\r\n\r\n\r\n
\r\n\r\n
Why Technicians Choose SS-C210-I<\/h3>\r\n
\r\n \t- \r\n
- \r\n
- \r\n
- \r\n
- \r\n
✅ Pinpoint accuracy:<\/strong> the slim cylindrical end reaches pads between shields and connectors.<\/p>\r\n<\/li>\r\n \t
✨ Better looking joints:<\/strong> stable temperature helps avoid dull or grainy finishes on tiny pads.<\/p>\r\n<\/li>\r\n \t
🔍 See what you’re doing:<\/strong> the narrow silhouette keeps the work area visible under magnification.<\/p>\r\n<\/li>\r\n \t
🧩 Easy pairing:<\/strong> works seamlessly with no-clean flux pens and fine solder wire (0.2–0.4 mm).<\/p>\r\n<\/li>\r\n \t
🧰 Everyday precision:<\/strong> ideal for sensor pads, codec pins, jumper anchors, and pad rehab.<\/p>\r\n<\/li>\r\n<\/ul>\r\n\r\n
\r\n\r\n
Ideal Use Cases<\/h3>\r\n
\r\n \t- \r\n
- \r\n
- \r\n
- \r\n
- \r\n
Fine-pitch SMD:<\/strong> 0201\/0402 passives, QFN corners, PMIC side pins.<\/p>\r\n<\/li>\r\n \t
Connector service:<\/strong> FPC tails, USB-C pad touch-ups, board-to-board headers.<\/p>\r\n<\/li>\r\n \t
Pad re-tinning:<\/strong> polish and re-tin oxidized pads after hot-air work.<\/p>\r\n<\/li>\r\n \t
Jumpers & enamel wire:<\/strong> tack ultra-fine jumpers with minimal alloy.<\/p>\r\n<\/li>\r\n \t
Rework in tight clearances:<\/strong> reach past frames, shields, or sockets without contact.<\/p>\r\n<\/li>\r\n<\/ul>\r\n
Mazin (#9820) –
{“action”:”view”,”payload”:{“screen”:”edit_product”,”user”:”Mazin”},”time”:”2026-02-19 13:47:47″}
Admin1 (#289) –
{“action”:”status_change”,”payload”:{“from”:”pending”,”to”:”publish”,”by”:”Admin1″},”time”:”2026-02-19 17:40:09″}