Description
SUNSHINE Soldering Tip SS-210-K for T210 Handle — Knife (K) Geometry, Precision Microsoldering
Overview
The SUNSHINE SS-210-K Soldering Tip is a knife-shape (K) precision tip engineered for T210-style micro handles. With a flat, sharpened edge and stable thermal behavior, the SS-210-K excels at drag soldering fine-pitch, IC side-pin touch-ups, pad re-tinning, micro-jumper work, and solder/adhesive cleanup along frame edges or shields. If your bench runs a T210 micro handle, this is the workhorse K-blade you’ll keep docked for everyday rework.
✅ K-blade geometry: one tip covers tinning, drag soldering, point work & scraping
🎯 Fine-pitch control: stable heat at the edge for 0201/0402, QFN rims, FPC ends
🧰 T210 handle compatible: drop-in fit for T210 micro handpieces/stations
🧪 Clean wetting: iron-plated copper core for strong, consistent tinning
🔁 Fast changeover: quick swap and fast recovery on temperature
🛡️ ESD-bench friendly: suitable around sensitive electronics
Why Technicians Choose SS-210-K
✅ One-tip versatility: the knife edge does precision point work at the corner and wide heat spread on the flat.
✨ Glossy joints: stable temperature helps prevent dull finishes and bridges.
🔍 Microscope comfort: thin tip silhouette keeps the working area visible.
🧩 Great with flux: pairs beautifully with no-clean flux pens for crisp drag passes.
🧰 Everyday utility: from connector pads to shield edges, it earns its place on the stand.
Ideal Use Cases
Drag soldering fine-pitch: QFN, PMIC edges, codec/PMU side pins.
Connector service: FPC tails, USB-C pads, board-to-board headers.
Pad rehab: re-tinning oxidized pads after hot-air de-shielding.
Jumpers & enamel wire: quick tin/anchor with precise contact area.
Residue cleanup: soften and lift small solder blobs or cured flux at frame edges.
Pro tip: Use the corner of the K blade for pinpoint pads; lay the flat edge to drag across a pin row with a thin film of solder.
How to Get Perfect Results
Flux first: run a no-clean flux pen along the pads to improve wetting.
Load lightly: pre-tin the K edge; for drag, keep a tiny bead leading the pass.
Angle & pressure: 15–30° to the pads, minimal pressure—let heat do the work.
Bridge removal: add flux, lower temp slightly, and wick with fresh braid.
Tip care: refresh with solder often and clean in brass wool, not a wet sponge.
Specifications
| Category | Parameter | Value |
|---|
| Model | Marking | SS-210-K (printed on tip) |
| Geometry | Shape | K (Knife) |
| Compatibility | Handle/Stations | T210-style micro handle soldering stations |
| Material | Core/Plating | Copper core with iron plating (outer protective layers) |
| Use Range | Work Type | Microsoldering, drag solder, pad re-tinning, jumper work, cleanup |
| Maintenance | Cleaning | Brass wool / tip cleaner; keep lightly tinned |
| In-Box | Contents | 1× SUNSHINE SS-210-K tip (sealed) |
Designed for electronics work. Always use on an ESD-safe bench with fume extraction.
Workflow Examples
Fine-pitch drag: flux → pre-tin blade → lead a micro-bead → one smooth pass → post-pass wick if needed.
FPC tail repair: align, touch with K corner, feed the joint (not the tip), release clean.
Pad polish after hot air: flux → light pass with K flat → glossy pad ready for reflow.
Micro-jumper anchor: tack enamel wire with K corner, then reflow the far end.
Maintenance & Longevity
Keep the edge lightly tinned during pauses to resist oxidation.
Clean with brass wool; avoid filing/sanding the plated surface.
Do not quench a hot tip in liquid; allow normal cooling on the stand.
Store in a dry place; cap or park safely to protect the edge.
What’s in the Box
📦 1× SUNSHINE SS-210-K Soldering Tip (Knife)
SUNSHINE SS-210-K سنّ لحام لمقبض T210 — شكل سكين (K) للميكرو-سولدرنج
لمحة عامة
SUNSHINE SS-210-K هو سنّ لحام شكل سكين (K) مخصّص لـ مقبض T210 للأعمال الدقيقة. الحافة المسطّحة الحادّة بتديك تحكّم ممتاز في سحب القصدير على الأرجل الدقيقة، تشطيب أطراف الـIC، إعادة قصدرة البادز، تثبيت جَمبرات شعر، وكمان تنضيف بواقي قصدير أو فلكس على الحواف. لو بتشتغل بمقبض T210، فالـ SS-210-K هو السنّ العملي اللي هتلاقيه دايمًا على الستاند.
✅ هندسة K: نفس السنّ يعمل نقطة دقيقة عند الركن، وسحب عريض على المسطّح
🎯 تحكّم في الدقة: شغل 0201/0402، حواف QFN، نهايات FPC
🧰 متوافق مع T210: يركب على مقبض T210 ومحطّاته مباشرة
🧪 بلل نظيف: قلب نحاس مطلي حديد لقصترة ثابتة ومستمرة
🔁 تبديل سريع: تغيير سنّ سريع مع استرجاع حراري قوي
🛡️ مناسب لـESD: آمن حوالين الدوائر الحسّاسة مع انضباط بنش
ليه الفنيين بيختاروه؟
✅ سنّ واحد لعدّة مهام: ركن السن للنقاط الدقيقة، والمسطّح لسحب قصدير على صف أرجل.
✨ تشطيب لامع: ثبات الحرارة يقلّل البهتان والجسور.
🔍 مريح تحت الميكروسكوب: جسم السن رفيع وما يحجبش الرؤية.
🧩 يتعامل مع الفلكس: مع قلم no-clean هتاخد سحب نضيف بمجهود أقل.
🧰 سلاح يومي: سوكيتات، حواف شيلد، ترميم بادز—سنّ يخدم معظم المهام.
استخدامات مثالية
سحب قصدير Fine-pitch: حواف QFN، أطراف PMIC/Codec.
سوكيتات: FPC، USB-C، هيدرز بورد-لبورد.
ترميم بادز: قصدرة بعد فك الشيلد بالهوت إير.
جَمبرات وأسلاك مينا: تثبيت دقيق وسريع.
تنضيف بقايا: تسخين ورفع نقط قصدير صغيرة أو فلكس ناشف.
💡 نصيحة: استخدم ركن سنّ K للنقط الصغيرة جدًا، والمسطّح للسحب على صف أرجل بخرط رفيع من القصدير.
خطوات للحصول على نتيجة مثالية
فلكس الأول: مرّر قلم no-clean على البادز.
تحميل خفيف: قصتر الحافة بكمية قليلة؛ في السحب خليك بماسكة خرزة صغيرة قدّام السن.
زاوية وضغط: زاوية 15–30° وضغط خفيف—الحرارة هي اللي تعمل الشغل.
سحب الجسور: فلكس + درجة أقل شوية + فتيلة جديدة.
العناية بالسن: قصترة متكررة وتنضيف بـ صوف نحاس بدل إسفنجة مبلولة.
المواصفات الفنية
| الفئة | البند | القيمة |
|---|
| الموديل | المطبوع | SS-210-K |
| الشكل | الهندسة | K (سكين) |
| التوافق | المقبض/المحطة | مقبض T210 ومحطات T210 |
| الخامة | القلب/الطلاء | قلب نحاس مع طلاء حديد (طبقات حماية خارجية) |
| مجال العمل | الاستخدام | ميكرو-سولدرنج، سحب قصدير، ترميم بادز، جَمبرات، تنضيف |
| الصيانة | التنضيف | صوف نحاس/Tip Cleaner؛ حافظ على قصترة خفيفة |
| محتويات العبوة | — | سنّ واحد SS-210-K (مغلف) |
للاستخدام الإلكتروني الدقيق؛ اشتغل على مات ESD ومع شفاط أبخرة.
سيناريوهات شغل
سحب Fine-pitch: فلكس → قصترة → خرزة صغيرة قدّام السن → سحبة واحدة مستقيمة → فتيلة عند الحاجة.
سوكيت FPC: محاذاة → لمسة بركن السن → تغذية قصدير على الوصلة.
تلميع بادز بعد الهوت إير: فلكس → مسحة بالمسطّح → باد لامع جاهز.
تثبيت جَمبر شعر: تثبيت أولي عند الركن، ثم نقطة تثبيت عند الطرف التاني.
العناية والعمر
خلي السن مقصتر خفيف وقت التوقفات.
نظّف بـ صوف نحاس؛ بلاش برد/صنفرة لطلاء السن.
ما تطفّيش السن السخن في سوائل.
خزّن جاف، وعلى الستاند لحماية الحافة.
محتويات العبوة
📦 سنّ لحام SUNSHINE SS-210-K (سكين) — قطعة واحدة
| jBC C210-K style tips | knife soldering tip | T210 K blade |
| Mechanic / Quick K tips | K geometry tip | micro knife tip |
| OSS / KSGER T210 tips | drag solder tip | T210 soldering cartridge |
| Generic T210 K-form | fine pitch tip | knife edge solder tip |
Only logged in customers who have purchased this product may leave a review.
Admin1 (#289) –
{“action”:”status_change”,”payload”:{“from”:”new”,”to”:”draft”,”by”:”Admin1″},”time”:”2025-12-06 20:56:55″}
Mazin (#9820) –
{“action”:”view”,”payload”:{“screen”:”edit_product”,”user”:”Mazin”},”time”:”2026-02-19 11:29:16″}
Mazin (#9820) –
{“action”:”edit_diff”,”payload”:{“by”:”Mazin”,”diff”:[]},”time”:”2026-02-19 13:17:40″}
Mazin (#9820) –
{“action”:”status_change”,”payload”:{“from”:”draft”,”to”:”pending”,”by”:”Mazin”},”time”:”2026-02-19 13:17:44″}
Mazin (#9820) –
{“action”:”edit_diff”,”payload”:{“by”:”Mazin”,”diff”:{“core:title”:{“old”:”Draft – X8270″,”new”:”SUNSHINE Soldering Tip SS-210-K for T210 Handle — Knife (K) Geometry, Precision Microsoldering”},”core:excerpt”:{“old”:””,”new”:”
SUNSHINE SS-210-K Soldering Tip<\/strong> — knife (K) geometry<\/strong> for T210 handles. Ideal for drag soldering, fine-pitch touch-ups, pad re-tinning, jumpers, and cleanup. Clean wetting, quick swaps, ESD-bench friendly.<\/p>\r\n
SUNSHINE SS-210-K سنّ لحام شكل سكين (K)<\/strong> لمقبض T210—مثالي لسحب القصدير، تشطيب الأرجل الدقيقة، إعادة قصدرة البادز، الجَمبرات، والتنضيف. قصترة نظيفة وتبديل سريع ومناسب للبنش ESD.<\/p>“},”core:content”:{“old”:””,”new”:”
SUNSHINE Soldering Tip SS-210-K for T210 Handle — Knife (K) Geometry, Precision Microsoldering<\/h2>\r\n
Overview<\/h3>\r\n
The SUNSHINE SS-210-K Soldering Tip<\/strong> is a knife-shape (K) precision tip<\/strong> engineered for T210-style micro handles<\/strong>. With a flat, sharpened edge and stable thermal behavior, the SS-210-K<\/strong> excels at drag soldering fine-pitch<\/strong>, IC side-pin touch-ups<\/strong>, pad re-tinning<\/strong>, micro-jumper work<\/strong>, and solder\/adhesive cleanup<\/strong> along frame edges or shields. If your bench runs a T210 micro handle, this is the workhorse K-blade<\/strong> you’ll keep docked for everyday rework.<\/p>\r\n
✅ K-blade geometry<\/strong>: one tip covers tinning, drag soldering, point work & scraping
🎯 Fine-pitch control<\/strong>: stable heat at the edge for 0201\/0402, QFN rims, FPC ends
🧰 T210 handle compatible<\/strong>: drop-in fit for T210 micro handpieces\/stations
🧪 Clean wetting<\/strong>: iron-plated copper core for strong, consistent tinning
🔁 Fast changeover<\/strong>: quick swap and fast recovery on temperature
🛡️ ESD-bench friendly<\/strong>: suitable around sensitive electronics<\/p>\r\n\r\n\r\n
\r\n\r\n
Why Technicians Choose SS-210-K<\/h3>\r\n
\r\n \t- \r\n
- \r\n
- \r\n
- \r\n
- \r\n
✅ One-tip versatility<\/strong>: the knife edge does precision point work at the corner and wide heat spread on the flat.<\/p>\r\n<\/li>\r\n \t
✨ Glossy joints<\/strong>: stable temperature helps prevent dull finishes and bridges.<\/p>\r\n<\/li>\r\n \t
🔍 Microscope comfort<\/strong>: thin tip silhouette keeps the working area visible.<\/p>\r\n<\/li>\r\n \t
🧩 Great with flux<\/strong>: pairs beautifully with no-clean flux pens<\/strong> for crisp drag passes.<\/p>\r\n<\/li>\r\n \t
🧰 Everyday utility<\/strong>: from connector pads to shield edges, it earns its place on the stand.<\/p>\r\n<\/li>\r\n<\/ul>\r\n\r\n
\r\n\r\n
Ideal Use Cases<\/h3>\r\n
\r\n \t- \r\n
- \r\n
- \r\n
- \r\n
- \r\n
Drag soldering fine-pitch<\/strong>: QFN, PMIC edges, codec\/PMU side pins.<\/p>\r\n<\/li>\r\n \t
Connector service<\/strong>: FPC tails, USB-C pads, board-to-board headers.<\/p>\r\n<\/li>\r\n \t
Pad rehab<\/strong>: re-tinning oxidized pads after hot-air de-shielding.<\/p>\r\n<\/li>\r\n \t
Jumpers & enamel wire<\/strong>: quick tin\/anchor with precise contact area.<\/p>\r\n<\/li>\r\n \t
Residue cleanup<\/strong>: soften and lift small solder blobs or cured flux at frame edges.<\/p>\r\n<\/li>\r\n<\/ul>\r\n
Mazin (#9820) –
{“action”:”view”,”payload”:{“screen”:”edit_product”,”user”:”Mazin”},”time”:”2026-02-19 13:17:55″}
Mazin (#9820) –
{“action”:”edit_diff”,”payload”:{“by”:”Mazin”,”diff”:{“core:content”:{“old”:”
SUNSHINE Soldering Tip SS-210-K for T210 Handle — Knife (K) Geometry, Precision Microsoldering<\/h2>\r\n
Overview<\/h3>\r\n
The SUNSHINE SS-210-K Soldering Tip<\/strong> is a knife-shape (K) precision tip<\/strong> engineered for T210-style micro handles<\/strong>. With a flat, sharpened edge and stable thermal behavior, the SS-210-K<\/strong> excels at drag soldering fine-pitch<\/strong>, IC side-pin touch-ups<\/strong>, pad re-tinning<\/strong>, micro-jumper work<\/strong>, and solder\/adhesive cleanup<\/strong> along frame edges or shields. If your bench runs a T210 micro handle, this is the workhorse K-blade<\/strong> you’ll keep docked for everyday rework.<\/p>\r\n
✅ K-blade geometry<\/strong>: one tip covers tinning, drag soldering, point work & scraping
🎯 Fine-pitch control<\/strong>: stable heat at the edge for 0201\/0402, QFN rims, FPC ends
🧰 T210 handle compatible<\/strong>: drop-in fit for T210 micro handpieces\/stations
🧪 Clean wetting<\/strong>: iron-plated copper core for strong, consistent tinning
🔁 Fast changeover<\/strong>: quick swap and fast recovery on temperature
🛡️ ESD-bench friendly<\/strong>: suitable around sensitive electronics<\/p>\r\n\r\n\r\n
\r\n\r\n
Why Technicians Choose SS-210-K<\/h3>\r\n
\r\n \t- \r\n
- \r\n
- \r\n
- \r\n
- \r\n
✅ One-tip versatility<\/strong>: the knife edge does precision point work at the corner and wide heat spread on the flat.<\/p>\r\n<\/li>\r\n \t
✨ Glossy joints<\/strong>: stable temperature helps prevent dull finishes and bridges.<\/p>\r\n<\/li>\r\n \t
🔍 Microscope comfort<\/strong>: thin tip silhouette keeps the working area visible.<\/p>\r\n<\/li>\r\n \t
🧩 Great with flux<\/strong>: pairs beautifully with no-clean flux pens<\/strong> for crisp drag passes.<\/p>\r\n<\/li>\r\n \t
🧰 Everyday utility<\/strong>: from connector pads to shield edges, it earns its place on the stand.<\/p>\r\n<\/li>\r\n<\/ul>\r\n\r\n
\r\n\r\n
Ideal Use Cases<\/h3>\r\n
\r\n \t- \r\n
- \r\n
- \r\n
- \r\n
- \r\n
Drag soldering fine-pitch<\/strong>: QFN, PMIC edges, codec\/PMU side pins.<\/p>\r\n<\/li>\r\n \t
Connector service<\/strong>: FPC tails, USB-C pads, board-to-board headers.<\/p>\r\n<\/li>\r\n \t
Pad rehab<\/strong>: re-tinning oxidized pads after hot-air de-shielding.<\/p>\r\n<\/li>\r\n \t
Jumpers & enamel wire<\/strong>: quick tin\/anchor with precise contact area.<\/p>\r\n<\/li>\r\n \t
Residue cleanup<\/strong>: soften and lift small solder blobs or cured flux at frame edges.<\/p>\r\n<\/li>\r\n<\/ul>\r\n
Mazin (#9820) –
{“action”:”view”,”payload”:{“screen”:”edit_product”,”user”:”Mazin”},”time”:”2026-02-19 13:47:45″}
Admin1 (#289) –
{“action”:”status_change”,”payload”:{“from”:”pending”,”to”:”publish”,”by”:”Admin1″},”time”:”2026-02-19 17:40:32″}