
18650 Battery Insulation Paper Hollow Pack 4S Hole 1pcs
18650 Battery Insulation Paper Hollow Pack 4S Hole 1pcs
- Compatibility: 18650/18500 lithium battery
- Type: 4s Cell
- No. of Mat in Package: 1
- Outer Ring Diameter: 17mm each
- Inner Ring Diameter: 10mm each
- Thickness: 0.25mm
- Color: Dark Green
- Description
Description
18650 Battery Insulation Paper Hollow Pack 4S Hole 1pcs
This 4s Electrical Insulating Adhesive Mat for Battery Cell terminal Insulation is a cardboard paper for combine two 18650 battery insulator. Better protection to avoid short circuit on batteries. Easy peel and stick application.
The Outer Ring Diameter is 17mm whereas Inner Ring Diameter is 10mm Thickness: 0.25mm 1Pcs Battery Insulators Adhesive Paper Rings.
- Take off each insulation paper from base paper.
- Put and stick upper hollow adhesive insulation paper on the top of battery positive.
- Put and stick lower solid adhesive insulation paper on the negative.
- Then, you can weld Ni tape or Ni-plated steel plate with positive, negative to make the battery pack.
Note: Colors in the image may vary from the Actual Product.
Features :
- Better protection to avoid short circuit on batteries.
- Perfect Build for DIY battery packs!
Package Includes :
1 x 4s Hole Electrical Insulating Adhesive Mat for Battery Cell terminal Insulation
| Compatibility | 18650/18500 lithium battery |
| Type | 4 Cell |
| No. of Mat in Package | 1 |
| Outer Ring Diameter(mm) | 17 |
| Inner Ring Diameter(mm) | 10 |
| Thickness (mm) | 0.25 |
| Color | Dark Green |
| Shipment Weight | 0.002 kg |
| Shipment Dimensions | 12 × 8 × 3 cm |
Related Products
4 x AA Battery Back To Back Holder Case Box
Black Plastic Storage Box Case Holder For Battery 4 X AAA Cell Box with On/Off Switch
3 x 1.5V AA Battery Holder With Cover And On/Off Switch
3 x 1.5V AAA Battery Holder With Cover And On/Off Switch
18650 Battery Insulation Paper Hollow Pack 6S Solid (1pcs Only Not Sheet)
Products With Similar Tags
Holder 18650 1Cell SMD Single Cell Surface-Mount Battery Holder
JH-8675 BMS 1S 2A 3.7V Lithium Battery Charger Protection Module with Nickel Strip
BMS 1S 3A 3.7V 2MOS Lithium Battery Protection Board for Polymer 18650 with Nickel Strip
0.4mmx20cm Double Side Adhesive Insulation Sticker For Lithium Battery Temperatures Paper Red Cardboard Fast Red Steel Paper -1M
TPW INR18650 Li-ion Rechargeable Battery 3.7V 7.4Wh 2000mAh – Flat Top (Single Cell)
18650 Battery Insulation Paper Hollow Pack 6S Solid (1pcs Only Not Sheet)
Double Side Adhesive Barley Insulation Paper 100mm x 1Meter – 0.2mm Thickness For Battery Pack
COB Headlamp 18650 USB-C (Multi-Mode, Red Light, Battery Indicator)
18650 3 X 6 Battery Spacer Holder Shell 1PCS
18650 Battery Insulation Paper Hollow Pack 4S Solid (1pcs Only Not Sheet)
