Main Features

• Thermal transfer support: helps improve contact between the component and heatsink.
• Syringe-style applicator: allows controlled application and easier handling.
• Suitable for electronics cooling: useful for processors, chips, power modules, and heatsink assemblies.
• Non-electrically conductive use: suitable for careful application around electronic components.
• Smooth paste texture: spreads easily to create a thin and even layer.
• Workshop-friendly size: 20mL capacity is practical for repeated repair and maintenance jobs.
• Useful for maintenance: helps renew old dried thermal paste during cleaning and servicing.

Technical Specifications

Recommended Uses

• Applying between a processor and its heatsink.
• Replacing old thermal paste during laptop and computer maintenance.
• Improving contact between power transistors or voltage regulators and metal heatsinks.
• Using with LED modules, high-power electronic components, and cooling plates.
• Electronics repair work where better heat dissipation is required.
• DIY projects that include heatsinks or metal cooling surfaces.

How to Use

1. Turn off the device and disconnect power before starting maintenance.
2. Remove the old thermal paste from the component and heatsink surface using suitable cleaning alcohol.
3. Make sure both surfaces are clean, dry, and free from dust or grease.
4. Apply a small amount of HY410 thermal grease to the center or contact area.
5. Spread it as a thin, even layer or allow the heatsink pressure to distribute it evenly.
6. Install the heatsink firmly without excessive movement.
7. Check the device temperature after assembly to confirm proper cooling performance.

Important Notes

• Use only a thin layer; too much paste can reduce cooling efficiency.
• Do not apply on live circuits or powered devices.
• Avoid touching the paste with dirty tools to prevent contamination.
• Keep the syringe cap closed after use to reduce drying.
• Actual label design or syringe shape may vary slightly depending on production batch while the product function remains the same.

Safety Precautions

• Keep away from children.
• Avoid contact with eyes and mouth.
• Wash hands after use.
• Use in a clean and well-ventilated work area.
• Do not use as an adhesive, soldering paste, or electrical contact cleaner.

Package Includes

• 1 × HY410 Thermal Grease 20mL Heatsink Compound Paste syringe

Micro Ohm Quality Note

This product is prepared with clear technical details to help technicians, makers, and electronics users choose the right thermal compound for heatsink installation and maintenance. For best results, clean the old paste properly, apply only a thin layer, and make sure the heatsink is mounted firmly.