Power Supply SMPS 12V 10A

370.00 EGP

SKU: Ps_12v10A Categories:
Share:

Power Supply SMPS 12V 10A 

12V 10A SMPS – 120W – DC Metal Power Supply – Good Quality – Non Water Proof.
In this paragraph, I’m going to discuss “what is power supply”
power supply is an electrical device that supplies electric power to an electrical load.
The primary function of a power supply is to convert electric current from a source to the correct voltagecurrent, and frequency to power the load.
As a result, power supplies are sometimes referred to as electric power converters.
Some power supplies are separate standalone pieces of equipment, while others are built into the load appliances that they power.
Examples of the latter include power supplies found in desktop computers and consumer electronics devices.

Features :

  1. Universal AC input/Full range /AC input range selectable by switch
  2. Built-in active PFC function, PF>0.94
  3. Protections: Short circuit / Overload / Over Voltage / Over Temperature
  4. Cooling by free air convection
  5. Withstand 300vac surge input for 5 second
  6. Output voltage programmable from 20-110% by 1~5.5VDC external control signal
  7. Built-in constant current limiting circuit
  8. 100% full load burn-in test
  9. LED indicator for power on
  10. No load power consumption<0.5W
  11. All using 105℃ long life electrolytic capacitors
  12. High operating temperature up to 70℃
  13. Withstand 5G vibration test
  14. Low cost, High efficiency, long life and high reliability

Specification :

Output:
DC voltage: 12.0V
Rated Current: 10.0A
Rated Power: 120W
Voltage ADJ. Range: 10.8-13.2V
Setup, Rise Time: 1000ms, 30ms/230VAC
Input:
Voltage Range: 85-264VAC     120-370VDC
Frequency Range: 47-63Hz
Efficiency (Typ.): 72%, 80%, 85%
AC Current (typ.): 0.35A/115VAC   0.25A/230VAC
Protection:
Overload: Above 105% rated output power,
Protection type: Hiccup mode, recovers automatically after fault condition is removed.
Over Voltage: 5V (5.75-6.75V)   12V (10.8~13.2V)    24V (20~26.4V) 48V(41~52.8V)
Protection type: Shut off o/p voltage, clamping by zaner diode
Over Temperature: U1 Tj 140℃ typically (U1) detect on main control IC
Protection type: shut down o/p voltage, recovers automatically after temperature goes down.
Environment:
Working TEMP.:-20~ 70℃ (Refer to “Derating Curve”)
Working Humidity: 20~90℃ RH non-condensing
Storage TEMP., Humidity: -40~ 85℃, 10~95% RH
Dimension:159*97*38mm

Shopping cart
Sign in


No account yet?

Create an Account
اقدر اخدمك ازي يا فندم ؟
Scan the code