
BMS 2S 13A Lithium Battery Protection Board for 18650 Cells 7.4V / 8.4V BMS HX-2S-D20
BMS 2S 13A 18650 7.4V-8.4V Lithium Battery Protection Board HX-2S-D20
Compact 2S lithium battery protection board designed for 18650 battery packs, providing overcharge, over-discharge, overcurrent, and short-circuit protection for 7.4V / 8.4V applications.
- Over Charge Voltage Range: 4.25-4.35 V + 0.05 V
- Over Voltage Range: 2.5-3.0 V + 0.05 V
- Max. Operating Current: 13 A
- Max. Limiting Current: 20 A
- Charging Voltage: 8.4-9 V
لوحة حماية مدمجة لبطاريات الليثيوم 2 خلايا من نوع 18650، توفر حماية من الشحن الزائد والتفريغ الزائد وزيادة التيار والقصر لباكات 7.4 فولت و8.4 فولت.
- Description
Description
BMS 2S 13A Lithium Battery Protection Board for 18650 Cells 7.4V / 8.4V BMS HX-2S-D20
The HX-2S-D20 2S Lithium Battery Protection Board is a compact Battery Management System (BMS) designed for 2-cell lithium-ion battery packs, such as packs built from 18650 cells. It helps monitor and protect the battery during charging and discharging, improving safety and extending battery life in portable and DIY power projects.
This module is suitable for 2S battery configurations, where two lithium cells are connected in series to provide a 7.4V nominal output and 8.4V full charge voltage. It includes essential protection features such as overcharge protection, over-discharge protection, overcurrent protection, and short-circuit protection.
The board has a simple connection layout with five terminals:
- B+ : Battery positive terminal
- B- : Battery negative terminal
- BM : Middle connection point between the two cells
- P+ : Positive charge / discharge terminal
- P- : Negative charge / discharge terminal
When the voltage exceeds the safe operating limit, the module enters protection mode to prevent damage to the battery pack. Recovery can take place automatically after conditions return to normal, or after reapplying the correct voltage to the board.
This BMS board is intended for lithium battery pack protection only. It is not a charger, so it should be used together with a proper 8.4V lithium charger or suitable charging circuit.
Features
- Designed for 2S lithium-ion battery packs
- Suitable for 18650 lithium cells
- Protection against overcharge
- Protection against over-discharge
- Protection against overcurrent
- Protection against short circuit
- Compact size and lightweight design
- Easy wiring and installation
- Suitable for DIY battery packs and repair work
Specifications
- Model: HX-2S-D20
- Battery Configuration: 2 Cells in Series (2S)
- Nominal Voltage: 7.4V
- Full Charge Voltage: 8.4V
- Overcharge Protection Voltage: 4.25V to 4.35V ± 0.05V
- Over-discharge Protection Voltage: 2.5V to 3.0V ± 0.05V
- Max. Operating Current: 13A
- Max. Limiting Current: 20A
- Charging Voltage: 8.4V to 9V
- Quiescent Current: Less than 10uA
- Internal Resistance: Less than 300 Ohm
- Operating Temperature: -40°C to +50°C
- Board Dimensions: 44.77 × 18.85 × 3.5 mm
- Weight: 4g
Package Includes
- 1 x 2S 13A 18650 Lithium Battery Protection Board HX-2S-D20
لوحة حماية بطارية ليثيوم 2 خلايا 13 أمبير لبطاريات 18650 بجهد 7.4V / 8.4V موديل HX-2S-D20
تُعد لوحة حماية بطارية الليثيوم HX-2S-D20 وحدة إدارة وحماية بطاريات BMS مخصصة لباكات الليثيوم المكوّنة من خليتين على التوالي، مثل باكات 18650. وظيفتها الأساسية هي مراقبة حالة البطارية وحمايتها أثناء الشحن والتفريغ، مما يساعد على تحسين الأمان وإطالة عمر الباك.
هذه اللوحة مناسبة لتكوين 2S، أي توصيل خليتين ليثيوم على التوالي للحصول على جهد اسمي 7.4 فولت وجهد شحن كامل 8.4 فولت. وتوفر اللوحة وسائل حماية أساسية تشمل:
- الحماية من الشحن الزائد
- الحماية من التفريغ الزائد
- الحماية من زيادة التيار
- الحماية من القصر
تأتي اللوحة بخمسة أطراف توصيل رئيسية:
- B+ : موجب البطارية
- B- : سالب البطارية
- BM : نقطة المنتصف بين الخليتين
- P+ : موجب الشحن / التفريغ
- P- : سالب الشحن / التفريغ
عند تجاوز الجهد أو التيار الحدود المسموح بها، تدخل اللوحة في وضع الحماية لمنع تلف الخلايا. ويمكن أن تعود للعمل بشكل طبيعي تلقائيًا بعد زوال سبب الحماية، أو بعد إعادة توصيل الجهد بشكل صحيح.
هذه اللوحة مخصصة لحماية البطارية فقط، وهي ليست شاحنًا، لذلك يجب استخدامها مع شاحن ليثيوم مناسب بجهد 8.4 فولت أو دائرة شحن مناسبة.
المميزات
- مخصصة لباكات الليثيوم 2 خلايا
- مناسبة لخلايا 18650
- حماية من الشحن الزائد
- حماية من التفريغ الزائد
- حماية من زيادة التيار
- حماية من القصر
- حجم صغير وسهل التركيب
- توصيلات بسيطة وعملية
- مناسبة لتجميع وصيانة باكات البطاريات
المواصفات
- الموديل: HX-2S-D20
- تكوين البطارية: خليتان على التوالي (2S)
- الجهد الاسمي: 7.4V
- جهد الشحن الكامل: 8.4V
- جهد حماية الشحن الزائد: من 4.25V إلى 4.35V ± 0.05V
- جهد حماية التفريغ الزائد: من 2.5V إلى 3.0V ± 0.05V
- أقصى تيار تشغيل: 13A
- أقصى تيار حدّي: 20A
- جهد الشحن المناسب: من 8.4V إلى 9V
- تيار السكون: أقل من 10uA
- المقاومة الداخلية: أقل من 300 أوم
- درجة حرارة التشغيل: من -40°C إلى +50°C
- أبعاد اللوحة: 44.77 × 18.85 × 3.5 مم
- الوزن: 4 جم
محتويات العبوة
- 1 × لوحة حماية بطارية ليثيوم 2 خلايا 13 أمبير HX-2S-D20
Related Products
BMS 5S 100A Battery Balance Charging BMS Battery Protection Board-white
TP4056 Lithium Battery Charger Module with Micro USB & Protection
1S-8S 3.7V Lithium Battery Capacity Indicator Module Display Green General Electric Vehicle Battery Power Tester Li-Ion
BMS 1S 3.7V Lithium Battery Protection Board for Polymer 18650 Bonding Pad (can Spot/Weld) 3A Overcurrent Value
Products With Similar Tags
18650 3 X 5 Battery Spacer Holder Shell 1PCS
2S 8A 8.4V 18650 Lithium Battery Charger Board Protection Module
BMS 1S 3A 3.7V 2MOS Lithium Battery Protection Board for Polymer 18650 with Nickel Strip
Holder 18650 1Cell SMD Single Cell Surface-Mount Battery Holder
18650 Battery Insulation Paper Hollow Pack 4S Solid (1pcs Only Not Sheet)
18650 Battery Insulation Paper Hollow Pack 6S Solid (1pcs Only Not Sheet)
MPPT Solar Charger Controller 40A 12V/24V — Dual USB 5V/2A
18650 Battery Case Holder 3 cells Black Plastic Storage Box Case Holder For Battery 3 x 18650 Cell Box, Without Cover
Holder 18650 2Cell SMD Dual Cell SMD Battery Holder – 2 Slot Open Frame
BMS 3S 8A 12V 18650 Lithium Battery Protection Board 11.1V 12.6V
BMS 2S 4A Li-Ion Battery Protection Board with Nickel Strip
