3.3V/5V MB102 Breadboard Power Supply Module
3.3V/5V MB102 Breadboard Power Supply Module
- Breadboard power supply module, compatible with 5V, 3.3V.
- Apply to MB102 breadboard
- Input voltage: 6.5-12 V (DC) or USB power supply
- Output voltage: 3.3V/5V can switch over
- Maximum output current: <700 ma
- Fluctuation two road independent control can switch over to 0 V, 3.3 V, 5 V
- On-board two groups of 3.3V, 5V DC output plug pin, convenient external lead use.
- Description
- Brand
Description
3.3V/5V MB102 Breadboard Power Supply Module
This is a 3.3V/5V MB102 Breadboard Power Supply Module which provides a dual 5 V and 3.3 V power rails and has a multi-purpose female USB socket.
The 3.3V/5V MB102 Breadboard Power Supply Module securely fits in a standard 400 or 800 tie points breadboard it also features reverse polarity protection, the module can take 6.5V to 12V input and can produce 3.3V and 5V.
The module can also output 5V on USB connector or input through the USB connector. It’s a must-have product for experimenters those have to test/prototype electronic circuits on the breadboard.
Features :
- Breadboard power supply module, compatible with 5V, 3.3V.
- Apply to MB102 breadboard
- Fluctuation two road independent control can switch over to 0 V, 3.3 V, 5 V
- On-board two groups of 3.3V, 5V DC output plug pin, convenient external lead use.
Package Includes :
1 x MB102 Breadboard Power Supply Module
| Input Voltage (V) | 6.5 to 12 |
| Output Voltage(V) | 3.3/5 |
| Maximum Output Current(mA) | <700 |
| Length (mm) | 53 |
| Width (mm) | 32 |
| Height (mm) | 23 |
| Weight (gm) | 8 |
| Shipment Weight | 0.012 kg |
| Shipment Dimensions | 7 × 6 × 4 cm |
Related Products
DS1302 RTC Real Time Clock Module No Battery
OSEPP OP-LS-00017 Mini Breadboard - Self Adhering (2 pack) Breadboard 170 Point (High Quality)
RGB LED MODULE Dip LED HW-479
MB102 830 Points Solderless Prototype PCB Breadboard High Quality
400 Tie Points Contacts Mini Circuit Experiment Solderless Breadboard
Breadboard 3220 Tie-Point Solderless Breadboard with 7 Power Lanes
5V Micro USB DIY Step Up Power Bank Charging Module with Charging Protection
Products With Similar Tags
Arduino Nano CH340G Type-C (Soldered Headers, Board Only)
Breadboard 2390 Tie-Point Solderless Breadboard with 5 Power Lanes
400 Tie Points Contacts Mini Circuit Experiment Solderless Breadboard
Sensor Shield V5 Expansion Board For Arduino UNO
Breadboard 1660 Tie-Point Solderless Breadboard with 3 Binding Posts and Aluminum Base
OSEPP LS-00051 Breadboard Translucent 400 tie in points
Breadboard 3220 Tie-Point Solderless Breadboard with 7 Power Lanes
MB102 830 Points Solderless Prototype PCB Breadboard High Quality
Small Alligator Clip Pair 28mm – Red Black Testing Clamps
Arduino Nano CH340 – Soldered Pins Mini USB ATmega328P Board
More From This Brand
Stepper Motor DC 5V 28BYJ-48
Aluminium Heat sink Heatsink 6 Fins (100 x 40 x 20 mm) White
BMS 3S 8A 12V 18650 Lithium Battery Protection Board 11.1V 12.6V
4WD Big Acrylic Plate Panel For Smart Car Chassis
402025 3.7V 300mAh LiPo Battery — 25×20×4 mm Flat Cell for Compact Devices
AD20P-1230A Brushless DC Water Pump 12V-4.8W-240 L/H-3meters height-IP68
JST 4 Pin XH2.54 Male and Female Connector Plug with Wire Cable 20CM
Slim Power Supply 12V 5A 60W Slim Metal Switching Power Supply (AC 190–240V 50/60Hz)
DC 3-6 V Mini Micro Submersible Water Pump 120L/H
JST Connector 2.54mm Pitch 3 pin XH2.54 Polarized Male on PCB XH-3A
Ultraviolet UV LED 5mm 395nm
