
Brand
Arduino
Arduino Nano CH340 Chip Board Without USB cable (not Soldered)
- Operating Voltage (logic level): 5V
- Not Soldered Connector
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
- Description
- Brand
Description
The CH340 not Soldered Nano Board R3 Chip is based on the famous Arduino platform and does all the functions of Uno, but with a smaller footprint.
Nano CH340 Not Soldered Board R3 Chip is vital for your small project where you don’t need much of a pin-outs but the small size is very important to make it look good.
The Nano equips a low-cost USB-Serial Chip that makes it less in price than Nano with FTDI USB-Serial Chip used on older versions of Arduino Nano.
The Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano R3). It has more or less the same functionality of the Arduino Uno but in a different package. It lacks only a DC power jack and works with a Mini-B USB cable instead of a standard one.
The Nano can be power via the mini-USB connection, 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.
The size of Nano V3.0 with CH340 Chip is only 43 mm x 18 mm; it comes with 6 PWM I/O from the total of 14 digitals I/O, 8 analog inputs, 16Mhz clock speed and 32kB of flash memory.
Note:- CH340 chip might not work directly with some PC/Laptop, you will need some ch340 drivers.
Features :
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Support USB download and Power
- Support for external 5V ~ 12V DC power supply
- Support power supply by 9V battery
- Support ISP download
- Automatic reset during program download.
- Power OK blue LED on the bottom.
- Green (TX), red (RX) and orange (L) LED.
- 5V to AREF jumper.
- Auto sensing/switching power input.
- Small mini-B USB for programming and serial monitor (cable not included).
- ICSP header for direct program download.
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
Package Includes :
1 x Nano CH340 Chip Board Without USB cable compatible with Arduino (not Soldered)
| Analog I/O Pins | 8 |
| Architecture | AVR |
| Clock Speed | 16 MHz |
| Color | Blue |
| DC Current per I/O Pin (mA) | 40 |
| Digital I/O Pins | 22 |
| EEPROM | 1KB |
| Flash Memory | 32 KB |
| Input Voltage(Recommended) | 7-12 V |
| Microcontroller | ATmega328 |
| Operating Voltage (VDC) | 5 |
| Power Consumption (Watt) | 1 |
| PWM Output Pins | 6 |
| SRAM | 2 |
| Weight (gm) | 8 |
| Shipment Weight | 0.012 kg |
| Shipment Dimensions | 6 × 5 × 3 cm |
Related Products
Arduino UNO R4 Wifi Improved Version Type-C Made In China
Uno+WiFi R3 AtMega328p+NodeMCU ESP8266 8mb Memory USB-TTL CH340G Compatible for Arduino UNO
Arduino Mega2560 Pro ATMEGA2560-16AU USB CH340G Development Board
Arduino MKR WAN 1310 LoRa Connectivity (Original Made In Italy)
ESP-WROOM-32 CP2102 WIFI Bluetooth Networking Smart Component Development Board ESP32
Arduino Mega 2560 R3 Board Without USB Cable Atmega16U Cp2102 High Quality
Arduino Uno R3 SMD CH340G ATmega328p Development Board Compatible Without Cable
Products With Similar Tags
STC-1000 AC 220V Digital Temperature Controlled Thermostat Switch STC1000
IR Encoder Photoelectric Sensor 4-pin
18650 Li-ion Battery 3.7v Rechargeable ICR (Recycled) 1000-1500mA
Power Supply SMPS 12V 42A With Fan (S-500-12)
DT-06 WiFi Serial Port Transparent Transmission Module TTL to WIFI Compatible with BT HC-06 Interface ESP-M2
Micro USB Cable Wire Power and Data 85cm
TIP31C NPN Power Transistor
LED Strip Addressable RGB 5V 60LED/m IP20 5meter Roll SMD2812
LM35DZ Temperature Sensor – Original Analog IC
ESP-WROOM-32 Wifi Bluetooth Combo Module ESP32 Chip SMD
More From This Brand
Arduino MKR WAN 1310 LoRa Connectivity (Original Made In Italy)
Arduino UNO R4 Wifi Improved Version Type-C Made In China
Nano 328P Expansion Adapter Breakout Board IO Shield
Arduino Portenta Cat.M1/NB IoT GNSS Shield — Cellular + GNSS, Nano-SIM, u.FL
Arduino Leonardo — ATmega32U4 Board with Native USB HID, 20 I/O, 7 PWM
Arduino Pro Mini ATMEGA328P 5V/16M Blue – Standard Version
Arduino Mega 2560 R3 CH340G ATmel MCU ATMEGA2560-16U Improved Version CH340G Board (Board Only)
STM32F103C8T6 Minimum System Board Microcomputer STM32 ARM Core Board Original Chip
Uno+WiFi R3 AtMega328p+NodeMCU ESP8266 8mb Memory USB-TTL CH340G Compatible for Arduino UNO
