Liquid PH Value Detection Sensor Ph0-14 With PH Electrode Probe BNC Monitoring Control Board
This is a Liquid pH Value Detection Sensor for Arduino. This is used in water quality testing and Aquaculture
The pH stands for the power of hydrogen, which is a measurement of the hydrogen ion concentration in the body. The total pH scale ranges from 1 to 14, with 7 considered to be neutral. A pH less than 7 is said to be acidic and solutions with a pH greater than 7 are basic or alkaline.
The PH electrode has a single cylinder that allows direct connection to the input terminal of a pH meter, controller, or any pH device which has a BNC input terminal. The pH electrode probe is accurate and reliable that can give almost instantaneous readings.
Connection Diagram of Liquid pH Value Detection Sensor for Arduino:
This is Electrode Probe for Liquid pH Value Detection Sensor Module. Need to measure water quality and other parameters but haven’t got any low-cost pH meter? Find it difficult to use with Arduino?
The electrode is made of a pH glass electrode and a reference electrode combined composite electrode, which is pH meter measuring sensor for measuring the concentration of an aqueous solution of H (pH value), it is widely used in various fields to be detected in the pH.
The PH electrode has a single cylinder that allows direct connection to the input terminal of a PH meter, controller, or any PH device which has a BNC input terminal. The PH electrode probe is accurate and reliable that can give almost instantaneous readings.
Features :
- BNC Connector is suitable for most PH meter and controller.
- Suitable for a wide range of application: Aquariums, Hydroponics, Laboratory, etc.
Specification of Electrode Probe :
| pH Range | 0-14 pH |
| Operating Temperature (°C) | 0 to 60 |
| Zero Point | 7±0.5 pH |
| Alkali Error | 0.2 pH |
| Theoretical Percentage Slope | ≧98.5% |
| Internal Resistance | ≦250MΩ |
| Response Time | ≦1min |
| Terminal Blocks | BNC plug |
| Total Probe Length (m) | Approx 1m |
| Weight (gm) | 56 |
| Shipment Weight | 0.07 kg |
| Shipment Dimensions | 24 × 4 × 4 cm |
Specification of Liquid pH Value Detection Sensor:
| Heating Voltage (V) | 5±0.2 |
| Working Current (mA) | 5 to 10 |
| Detection Concentration Range | PH0-14 |
| Detection Range of Temperature (°C) | 0 to 60 |
| Response Time (s) | ≤5 |
| Stability Time (s) | ≤60 |
| Power Consumption (W) | ≤0.5 |
| Operating Temperature (°C) | -10 to 50 |
| Working Humidity (%RH) | 95 |
| PCB Size ( L x W ) mm | 42 x 32 |
| Height (mm) | 16 |
| Weight (gm) | 20 |
| Shipment Weight | 0.022 kg |
| Shipment Dimensions | 8 × 4 × 2.5 cm |
Package Includes :
1 x Electrode Probe for Liquid pH Value Detection Sensor Module.
1 x Liquid pH Value Detection Sensor For Arduino
1 x set of Mounting Accessories
