Welcome to Micro Ohm Electronics!
phone-call
010 3033 2568
location
Our Location

2.4GHz NRF24L01+PA+LNA SMA Wireless Transceiver Antenna

180.00 EGP

  1. Voltage: 3-3.6V (recommended 3.3V) V.
  2. Maximum output power: 20dBm.
  3. Power-down mode current: 4.2uA.
  4. Operating Range: 1Km
  5. Antenna Gain (peak): 2Dbi.
  6. 2MB rate (Open area): 520m.
  7. 1MB rate (Open area): 750m.
  8. 250Kb rate (Open area): 1100m.
  9. It uses 2.4GHz global open ISM band, with license free.
  10. SPI interface facilitates the communication with MCU I/O port.
SKU: D16_NRF24l01AntennaMod Category:

The NRF24L01 module is the latest in RF modules. This module uses the 2.4GHz transceiver from Nordic Semiconductor, the NRF24L01 . This transceiver IC operates in the 2.4GHz band and has many new features! Take all the coolness of the 2.4GHz NRF24L01 PA LNA SMA Wireless Transceiver Antenna and add some extra pipelines, buffers, and an auto-retransmit feature – very nice!

This board features a reverse polarized SMA connector for maximum RF range. And there is PA and LNA circuit on board, with the external antenna it can reach long distance than the one without these parts.

This module comes with the 2.4G antenna (2DB), with a 250Kbps transmission rate on open-air it can reach the 800-1K meters communication distance.

This wireless Transceiver module is an easy and suitable module if you want to set up your wireless communication system at a low cost!! It can achieve a good balance between wireless transition performance and cost!

You can easily add it with your own MCU/ARM/PIC/AVR/STM32 system! What’s more, this nRF24L01 module is designed with the Power amplifier and SMA antenna This allowed you to use the wireless communication up to 1000 meters! (No barrier)


Features :

  1. It uses 2.4GHz global open ISM band, with license-free.
  2. Transmit power is greater than 20 dBm.
  3. Support six-channel data reception.
  4. 2Mbit/s speed makes high-quality VoIP possible
  5. Multi-frequency points: 125 frequency points meet the needs of multi-point communications and frequency hopping.
  6. Low cost: integrated with high-speed signal processing parts associated with RF protocol, such as: automatically re-send lost packets and generate acknowledge signal;
  7. SPI interface facilitates the communication with MCU I/O port.
  8. Facilitate the development for customers, without development RF part.
  9. Software programming is fully compatible with NRF24L01 modules.

Package Includes :

1 x 2.4GHz NRF24L01 Transceiver module.

1 x SMA Antenna.

Input Supply voltage (V) 3 ~ 3.6 (recommended 3.3V)
Working current in transmit mode (mA) 115
Maximum output power (dBm) 20
Power-down mode current (μA) 4.2
Operating Range (Km) 1
Antenna Gain (peak) (dBi) 2
Receiver sensitivity -92dBm in 2Mbps mode
-95dBm in 1Mbps mode
-104dBm in 250kbps mode
PA growth (dB) 20
LAN growth (dB) 10
LAN noise figure (dB) 2.6
Operating temperature (°C) -20 ~ 70
Length (mm) 49
Width (mm) 16
Height (mm) 13
Weight (gm) 15
Length of Antenna (cm) 11
Shipment Weight 0.08 kg
Shipment Dimensions 12 × 2 × 1 cm
Shopping cart
Sign in


No account yet?

Create an Account

2.4GHz NRF24L01+PA+LNA SMA Wireless Transceiver Antenna

180.00 EGP