
BMS 5S 15A 18650 Lithium Battery Protection Board BMS
- Continuous discharge current: 15A(max)
- Instantaneous discharge current: 25A
- Charge voltage: 21V
- Charging current: 15A(max)
- Overcharge Protect:
- Over-charge detect: 4.28±0.05V
- Protect delay: 0.5s
- Over-charge release: 4.28±0.05V
- Working current: ≤30uA
- Sleep current: (when over-charge)≤10uA
- Working Temperature Range: -30-+80
- Description
Description
BMS (Battery Management System) – a battery management system that is designed to monitor the status of batteries, control the process of charging/discharging the battery etc.
Five batteries (18650) can be connected simultaneously to this charge-discharge controller module. The module has protection against short circuit, overcharge and over-discharge. One of the functions of the charge controller is to turn off the power supply for the batteries when the maximum capacity of at least one battery is reached. This BMS controller is designed for more than 30,000 hours of operation. The maximum allowable current is 25 A.
If the maximum permissible value of the supply voltage is exceeded, the charge controller activates the “protection” mode. In order to restore the module, it is necessary to re-apply voltage to the input of the BMS board or wait a while until the charge controller automatically disables protection.
Features:
- Small size designed for a four-cell battery pack.
- Simple and convenient circuit for easy connections
- Over-charge/Over-discharge Protection.
Package Includes:
1 x 5S 15A 18650 Lithium Battery Protection Board
| Model | HXYP-5SBM15 REV1.0 |
| Charge voltage | 21V |
| Charging current | 15A(max) |
| Continuous Discharge Current | 15A(max) |
| Instantaneous discharge current | 25A |
| Over-charge detect | 4.28±0.05V |
| Protect delay | 0.5s |
| Over-charge release | 4.28±0.05V |
| Over-discharge Protect | Over-discharge detect: 2.55±0.08V Over-discharge detect delay: 0.1s Release voltage: 2.9±0.1V |
| Short-circuit Protect | Protect condition: Cut load Detect delay: 250uS Release condition: Cut load |
| Over-current Protect | Detect voltage: 150mV Detect delay: 9MS Current detect: 30±3A Release condition: Cut load Inner Resistance: ≤20mΩ |
| Self-consumption | Working current: ≤30uA Sleep current: (when over-charge)≤10uA Working Temperature Range: -30-+80 |
| Length (mm) | 90.46 |
| Width (mm) | 17.30 |
| Height (mm) | 3.6 |
| Weight (gm) | 5 |
| Shipment Weight | 0.02 kg |
| Shipment Dimensions | 10 × 3 × 2 cm |
Related Products
Active Equalizer Balancer 5A 3S 4S Lipo/Lifepo4/LTO Battery Energy Capacitor EK-C4S5A
BMS 3S 8A 12V 18650 Lithium Battery Protection Board 11.1V 12.6V
BMS 7S 20A 8MOS BMS | 42 mA Balance, Thermistor Probe, Harness, Blue Cover
1S-8S 3.7V Lithium Battery Capacity Indicator Module Display Green General Electric Vehicle Battery Power Tester Li-Ion
BMS 5S 15A 18650 Li-ion Lithium Battery BMS Charger Protection Board for 18V 21V Battery
BMS 1S 3.7V Lithium Battery Protection Board for Polymer 18650 Bonding Pad (can Spot/Weld) 3A Overcurrent Value
BMS 2S 4A Li-Ion Battery Protection Board with Nickel Strip
Products With Similar Tags
BMS 7S 20A 8MOS BMS | 42 mA Balance, Thermistor Probe, Harness, Blue Cover
BMS 3S 8A 12V 18650 Lithium Battery Protection Board 11.1V 12.6V
LiFePO4 IFR26650 Battery 3.2V 4000mAh (Single Cell) – High-Rate, Long-Life
BMS 1S 3A 3.7V 2MOS Lithium Battery Protection Board for Polymer 18650 with Nickel Strip
BMS 3S 20A 3 Series 20A 18650 Lithium Battery Protection Board BMS 11.1V 12V 12.6V
BMS 2S 13A Lithium Battery Protection Board for 18650 Cells 7.4V / 8.4V BMS HX-2S-D20
BMS 2S 3A Li-ion Lithium Battery 7.4V 8.4V 18650 Charger Protection Board Module HW-882
2S 8A 8.4V 18650 Lithium Battery Charger Board Protection Module
BMS 5S 100A Battery Balance Charging BMS Battery Protection Board-white
4 Series 40A 18650 Lithium Battery Protection Board 14.8V 16.8V with Balance for Drill Motor Lipo Cell Module
BMS 3S 100A Li-no Battery Balance Charging BMS Protection PCB Board-White























